Before Use
Using a Card
A Card can be used to record pictures.
ªCaution before inserting/removing a
Card
Be sure to turn off the Movie Camera.
≥Otherwise, the Movie Camera may not function properly or it may cause the loss of recorded data in a Card.
ªInserting a Card
1Slide the [OPEN] Lever (6) to open the Card Slot Cover (4).
Turning on the Movie Camera
When the Movie Camera is turned on with the Lens Cap on, the Automatic White Balance Adjustment may not function properly. Please turn on the Movie Camera after removing the Lens Cap.
ªHow to Turn on the Power
1Set the [OFF/ON] Switch (43) to [ON] while pressing the button 1.
≥The Power Lamp (41) lights up.
(41)
ON
OFF
1
(6) OPEN
(4)
(43)
2While holding the Memory Card with its cut corner on top 1, insert it into the Card Slot.
1
3Close the Card Slot Cover (4) securely.
Removing the Card
Open the Card Slot Cover and then pull the Card straight out.
≥After removing the Card, close the Card Slot Cover.
ª[ACCESS] Lamp (9)
(9) 
ACCESS
While the Movie Camera is accessing the Card (reading, recording, playback or erasing), the [ACCESS] Lamp lights up.
≥While the [ACCESS] Lamp is on, never attempt to open the Card Slot Cover, to pull out the Card, to turn off the Movie Camera. Such actions will damage the Card, and recorded data, and cause the Movie Camera to malfunction.
ªHow to Turn off the Power
1Set the [OFF/ON] Switch (43) to [OFF] while pressing the button 1.
ON
F
F
O
(43)
1
Selecting Modes
You can choose a desired mode by rotating the Mode Dial.
1Rotate the Mode Dial (39).
| S |
(39) | D |
PC |
: Tape Recording Mode
Use this mode when recording pictures on a tape. Also, you can record still pictures on the card simultaneously during recording on a tape.
: Tape Playback Mode
Use this mode when playing back the recorded scene on a tape.
: Card Recording Mode
Use this mode when recording still picture or moving picture on a card. (moving picture on
: Picture Playback Mode
Use this mode when playing back the recorded still picture on a card.
: MPEG4 Playback Mode
