Others
≥To
[AV IN/OUT]
≥When using AV Cable and DV Cable (optional) at the same time, detach the Grip Belt first for easy connecting.
ªUsing the DV Cable for Recording
(Digital Dubbing)
≥Regardless of the setting, digital dubbing is carried out automatically in the same audio recording mode as that of the playback Cassette.
≥The images on the recorded monitor may be disturbed, but it does not affect the recorded images.
≥Even if Playback Digital Effects, Playback Zoom, or Playback Title In have been used, these effects are not output from the DV Terminal.
≥Even if you use device equipped with DV Terminals (such as IEEE1394), you may not be able to perform Digital Dubbing in some cases.
≥Date or other information to be displayed cannot be displayed if the software of the connected equipment does not support the display function.
≥You cannot record on a tape when MPEG4 recording from external input signals is in progress.
≥You cannot record on a card when recording on a tape from external input signals is in progress.
≥Disconnect the USB Cable since input signals from external input terminal cannot be recorded with connecting the USB Cable.
Cautions for Use
In the event of abnormal operation (e.g. if the unit emits smoke or an unusual smell), immediately stop operating the unit and consult the Panasonic Customer Care Centre on 132600.
ªAfter Use
1Take out the Cassette.
2Set the [OFF/ON] Switch to [OFF].
3Take out the Card.
4Detach the power supply and retract the Viewfinder or the LCD Monitor.
5To protect the Lens, attach the supplied Lens Cap.
ªCautions for Use
When you use your Movie Camera on a rainy or snowy day or on a beach, make sure that no water enters the Movie Camera.
≥Water may cause the Movie Camera or Cassette to malfunction. (Irreparable failure may occur.)
≥If sea water splashes onto the Movie Camera, wet a soft cloth with tap water, wring it well, and
use it to wipe the camera body carefully. Then, wipe it again thoroughly with a soft dry cloth.
Keep the Movie Camera away from magnetized equipment (such as a microwave oven, TV, video game equipment, etc.).
≥If you use the Movie Camera on or near a TV,
images or sounds may be disturbed due to electromagnetic wave radiation.
≥Do not use near cell phone because doing so may cause noise to adversely affect the picture and sound.
≥Recordings on the tape may be damaged, or images may be distorted, by strong magnetic fields created by speakers or large motors.
≥Electromagnetic wave radiation generated by a microprocessor may adversely affect the Movie Camera, causing the disturbance of images and sounds.
≥If the Movie Camera is affected by magnetically charged equipment and does not function properly, turn off the Movie Camera power and detach the Battery or AC Adaptor and then connect the Battery or AC Adaptor again.
Thereafter, turn on the Movie Camera power.
Do not use your Movie Camera near radio transmitters or
≥If you record pictures near radio transmitters or
may be adversely affected.
Do not use this Movie Camera for surveillance purposes or other business use.
≥If you use the Movie Camera for a long period of time, the internal temperature increases and, consequently, this may cause malfunction.
≥This Movie Camera is not intended for business use.
When you use your Movie Camera on a beach or similar place, do not let sand or fine dust get into the Movie Camera.
≥Sand or dust may damage the Movie Camera or Cassette. (Care should be taken when inserting and removing the Cassette.)
Do not spray insecticides or volatile chemicals onto the Movie Camera.
≥If the Movie Camera is sprayed with such chemicals, the camera body may be deformed and the surface finish may peel off.
