Others
≥When the [ß], [ßi] or [ßj] Indication is displayed, the Video Flash can be lighted. (When flashing in white, the Video Flash is charging.)
≥Charging the Video Flash takes 4 seconds maximum after lighting.
≥When the
≥When the [FLASH] on the [CAMERA]
ªRed Eye Reduction Function
≥Even if the [RED EYE] is set to [ON], you still may get red eyes phenomenon depending on the recording condition.
≥This function cannot be set without attaching Video Flash
accessories.
Using the Video Flash
(optional), [ß] Indication appears.
≥Using the Video Flash outdoors or with backlight or other bright conditions may result in white blotches (colour blotches) on the pictures. In this case, either adjust the iris manually or use the Backlight Compensation Function.
≥The available range is approximately 1 to 4 metres.
≥The Video Flash
≥When using the Video Flash
ªDigital Effect Functions
≥If you have set [EFFECT2] to [B/W] or [SEPIA], changing the selected White Balance Mode is not possible.
≥Setting the Cinema Mode cancels the
≥During the Digital Still Picture Mode, the Digital Effect Functions cannot be set.
In the following cases, using the [EFFECT1] on the [DIGITAL]
In the following cases, using the Digital Effect Function is not possible.
≥Title In
Picture-in-Picture Mode
≥If Mode Dial is operated, the smaller picture disappears.
≥Titles cannot be inserted into the smaller picture.
Multi-Picture Mode
≥If the [MULTI] Button is pressed while
≥The quality of Multi images deteriorates slightly. ≥The top and bottom of the Multi pictures will be
cut off slightly.
Wipe Mode and Mix Mode
If the following operation is carried out, stored images will be erased, and Wipe and Mix Functions cannot be used.
≥Set other item of Digital Effect
≥Operate the [OFF/ON] switch or Mode Dial
≥Insert or eject a cassette
ªPlaying Back
Repeat Playback
If you continue to press the [1] Button for
5 seconds or longer, the Movie Camera switches to Repeat Playback Mode, and the [R !] Indication appears. (To cancel Repeat Playback Mode, set the [OFF/ON] Switch to [OFF].)
Listening to Playback Sound through Headphones
If you want to use the headphones to listen to the playback sound, set [AV JACK] to [OUT/PHONES] and connect the headphones to the [PHONES] Socket
Choosing Sound during Playback You can select the sound by using the [AUDIO OUT] setting on the [PLAYBACK]
STEREO: Stereo Sound (main sound and sub
sound)
L:Left channel sound (main sound)
R:Right channel sound (sub sound) ≥If you dub a tape recorded at the [12bit]
selected as the [AUDIO REC] on the [RECORDING]
ªIndex Search Functions
≥Index Search may not be possible at the beginning of the tape.
≥Scene Index Search may not function properly if the interval between 2 scene index signals is less than 1 minute.
ªPlayback Zoom Function
≥You cannot adjust the sound volume with the Remote Controller in Playback Zoom Mode.
