Playback Mode
Playback Mode
Playing Back a Tape
The recorded scene can be played back immediately after the recording.
1Set the [OFF/ON] Switch (43) to [ON].
≥The [POWER] Lamp (40) lights up.
(40)
(43)
2Set the Mode Dial (39) to Tape Playback
Mode.
(39) 
3Press the [6] Button (19) to rewind the tape.
(19) 
≥Rewind the tape to the point where you want to start playback.
≥When the tape reaches the beginning, rewinding stops automatically.
4Press the [1] Button (17) to start playback.
≥The [!] Indication appears.
(17)
≥If a cassette recorded with a copyright protection signal is played back, the picture is distorted by
To Stop Playback
Press the [∫] Button (18).
ªAdjusting the Sound Volume
To adjust the volume, push the [W/T] Lever (37) to display the [VOLUME] Indication. Push the [W/T] Lever towards [T] to increase the volume or push the [W/T] Lever towards [W] to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.
VOL/JOG 
W T
(37)
To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.
≥The sound volume cannot be adjusted using the Remote Controller in Playback Zoom Mode.
≥For other notes concerning this item, see
Finding a Scene You Want to Play Back
ªCue/Review Playback
(19)(16)
If the [5] Button (16) or [6] Button (19) is pressed during Playback, it turns to Cue Playback
Aor Review Playback B.
A |
| B |
|
|
|
≥If the Button is held continuously, it turns to Cue Playback or Review Playback until you release it.
(18)
