Recording Mode
≥For recording a subject under a spotlight in a party, theatre, etc.
5)[º] Surf & Snow Mode
≥For recording in a glaring surrounding, such as ski slopes, beaches, etc.
To Cancel the Programme AE Function
Set the [PROG.AE] on the [CAMERA]
≥For other notes concerning this item, see
Recording in Natural Colours
(White Balance)
Depending on the scene or lighting conditions, the Automatic White Balance Adjustment Mode may not be able to bring out natural colours. In this case, the white balance can be adjusted manually.
When the Movie Camera is turned on with the Lens Cap on, the Automatic White Balance Adjustment may not function properly. Please turn on the Movie Camera after removing the Lens Cap.
1Set the [AUTO/MANUAL/FOCUS] Switch (21) to [MANUAL].
(21)
AUTO
FOCUS MANUAL
≥The [MNL] Indication appears.
2Press the [ENTER] Button (17).
(19)(17)(16)
≥The [AWB] Indication appears.
3Press the [5] Button (16) or [6] Button (19) to select a desired White Balance
Mode.
1) | 1AWB | 2) | 1 |
3) |
|
|
|
| 4) |
| |
1 | 1 | ||
|
|
| |
|
|
|
|
1)Automatic White Balance Adjustment [AWB]
2)The white balance setting that was previously set manually [1]
3)Outdoor Mode [z]
4)Indoor Mode (recording under incandescent lamp) [{]
To Resume Automatic Adjustment
Press the [5] Button (16) or [6] Button (19) until the [AWB] Indication appears. Or, set the [AUTO/MANUAL/FOCUS] Switch to [AUTO].
Adjusting White Balance Manually
White Balance Adjustment recognizes the colour of light and adjusts so that white will appear pure white. The Movie Camera determines the hue of light that comes through the Lens and White Balance Sensor, thereby judging the recording condition, and selects the closest hue setting. This function is called Automatic White Balance Adjustment.
For light outside the functional Auto White Balance Adjustment range, use the Manual White Balance Adjustment Mode.
1Set the [AUTO/MANUAL/FOCUS] Switch (21) to [MANUAL].
(21)
AUTO
FOCUS MANUAL
≥The [MNL] Indication appears.
2Point the Movie Camera at a
3Press the [ENTER] Button (17).
(19)(17)(16)
≥The [AWB] Indication appears.
4Press the [5] Button (16) or [6] Button (19) until the [1] Indication is displayed.
MNL
1 
5Keep pressing [ENTER] Button (17) until the [1] Indication stops flashing.
To Resume Automatic Adjustment
Press the [5] Button (16) or [6] Button (19) until the [AWB] Indication is displayed. Or, set the [AUTO/MANUAL/FOCUS] Switch to [AUTO].
