Initializing the Modes

¥ (White):

Others

DPOF Setting completed (set to

1or more picture) -37-

640 :[640k480] Image size ≥For images not recorded with this Movie

Camera, the size display is determined as follows according to the number of horizontal pixels.

640 :		640 or more, less than 800 (The
		size is not displayed at under
		640 pixels.)
SVGA :		800 or more, less than 1024
XGA :		1024 or more, less than 1280
SXGA :		1280 or more, less than 1600
UXGA :		1600 or more, less than 2048
QXGA :		2048 or more
PICTURE	(Cyan):	Photoshot Mode
PICTURE	(Red):	While Photoshot recording is
		activated
PICTURE (Green): While the card is being read
PICTURE	(Red):	No Card (Still Picture Mode)

ªTo Change the Counter Display Mode

By changing [C.DISPLAY] on the [DISPLAY] Sub-Menu, you can change the Counter Display Mode to Tape Counter Indication [COUNTER] (0:00.00), Memory Counter Indication [MEMORY] (M0:00.00), and Time Code Indication [TIMECODE] (0h00m00s00f). (-15-) By repeatedly pressing the [DISPLAY] Button on the Remote Controller, you can change the Counter Display Mode.

ªTo Display Date/Time Indication

To display Date/Time Indication, set the appropriate Date/Time in [DATE/TIME] on the [DISPLAY] Sub-Menu. (-15-)

You can also press the [DATE/TIME] Button of the Remote Controller repeatedly to display or change the Date/Time Indication.

ªTo Change the Display Mode

By changing [DISPLAY] on the [DISPLAY] Sub-Menu, you can change the Display Mode to All Function Display [ALL] and Minimum Display [OFF]. (-15-)

ªProgressive Photoshot

You cannot use the Progressive Photoshot Function in the following cases.

When using Tape Recording Mode

≥Digital Effect Modes in [EFFECT1] ≥Digital Zoom [D.ZOOM]

≥1/750 s or faster shutter speed

≥When brightness is insufficient

≥When the Night View Function is ON ≥When the Portrait Mode is used

≥When the Built-in LED Video Light lights and the Gain Up mode is set to on.

When using Card Recording Mode (NV-GS15 only)

≥When brightness is insufficient

≥When the Night View Function is ON

≥When the Built-in LED Video Light lights and the Gain Up mode is set to on.

You can change the Menu settings back to the shipping condition.

1Set [INITIAL] >> [INITIAL SET] >> [YES].

≥The initializing takes a little while. ≥After the initializing is completed, the

[COMPLETED] Indication appears with beeps.

≥Initializing will not erase the clock setting (-17-) that has been adjusted.

Warning/Alarm Indications

If any one of the following indications lights up or flashes, please check the condition of the Movie Camera.

3DEW (DEW DETECT/EJECT TAPE): Condensation has occurred. -53-

Y(CHECK REC TAB/TAPE NOT INSERTED): You are attempting to record pictures on a Tape with setting the accidental erasure prevention slider to [SAVE].

You are attempting Audio dubbing or Digital dubbing on a Tape with setting the accidental erasure previntion slider to [SAVE].

No Cassette is inserted. -12-

6(LOW BATTERY):

The Battery is low. Recharge it. -9-

0: The built-in battery is low. -18-

:(NEED HEAD CLEANING):

The video heads are dirty. -54-

2END (TAPE END):

The tape came to the end during recording.

REMOTE (CHECK REMOTE MODE):

Wrong Remote Controller Mode has been selected. -9-

UNPLAYABLE TAPE

(OTHER FORMAT):

You are attempting to play back a tape section that has been recorded with a different TV system.

UNABLE TO A. DUB (LP RECORDED):

Because the original recording was done in LP Mode, audio dubbing cannot be performed.

INCOMPATIBLE TAPE:

This cassette is incompatible.

-46-