Others
PUSH THE RESET SWITCH:
An irregularity in the mechanism has been detected. Press the [RESET] Button
CARD FULL:
Card does not have sufficient memory remaining.
Select Picture Playback Mode and delete unnecessary files.
NO CARD:
Card is not inserted.
NO DATA:
There is no recorded files in the Card.
UNPLAYABLE CARD:
You are attempting to play back a data which is not compatible with this Movie Camera.
CARD ERROR:
This Card is not compatible with this Movie Camera.
COPY INHIBITED:
Because the medium is protected by a copy guard, images cannot be recorded correctly.
INCORRECT OPERATION:
The Recording Start/Stop Button is pressed without connecting the USB cable to the PC in Picture Playback Mode.
CAN NOT USE USB CHANGE MODE:
The USB cable is connected to the Movie Camera in Card Recording Mode or Picture Playback Mode.
CAN NOT OPERATE:
You are attempting to record pictures on a Card with connecting the USB cable to the Movie Camera in Tape Recording/Playback Mode.
UNABLE TO WRITE (MULTI RECORDING):
The [PHOTO SHOT] Button is pressed when you are recording pictures on a Tape with setting the Digital Effect [MULTI] of [EFFECT1].
UNABLE TO WRITE:
The Recording Start/Stop Button is pressed when you are recording still pictures on the Card.
CASSETTE DOOR OPENED:
Close the Cassette Compartment Cover before recording.
NO TITLE:
Titles are not recorded.
UNABLE TO WRITE (WIDE MODE):
You are attempting to record pictures of S1 signal (with aspect ratio 16:9) by pressing the [PHOTO SHOT] Button.
FILE LOCKED:
You are attempting to erase protected pictures.
CARD LOCKED:
The write protection switch on the SD Memory Card is set to [LOCK].
DISCONNECT USB CABLE:
You are attempting to turn the Mode Dial or turn the Movie Camera off in PC Mode with connecting the USB cable to the Movie Camera.
Notes and Hints
ªConcerning the Power Supply
≥When the Movie Camera is used for a long time, the Camera body becomes warm, but this is not
a malfunction.
≥If the [CHARGE] Lamp does not light up although the Battery is attached to the AC Adaptor, detach the Battery and reattach it.
ªInserting/Removing the Cassette
≥In the case of using a previously recorded Cassette, you can use the Blank Search Function to find the position where you want to continue recording.
≥If a new Cassette is inserted, rewind to the beginning of the tape before starting recording.
≥When inserting the cassette, make sure it faces in the right direction and then push it in until it stops.
≥When the Cassette Holder is in action, do not touch anything except the [PUSH] mark.
≥When closing the Cassette Compartment Cover, do not get anything caught in the cover, such as a cable of an optional stereo microphone.
ªAlarm Sounds
When [BEEP SOUND] on the [INITIAL]
1 Beep
≥When you start recording
≥When you switch the [OFF/ON] Switch from [OFF] to [ON]
2 Beeps
≥When you pause recording 2 Beeps 4 times
≥If you perform a wrong operation before or during recording
