Others
XGA : 1024 or more, less than 1280
SVGA : 800 or more, less than 1024
640 :640 or more, less than 800 (The size is not displayed at under 640 pixels.)
Warning/alarm indications
If any one of the following indications lights up or flashes, please check the movie camera.
Confirmatory indications
Y: A cassette with the accidental erasure prevention slider placed in the [SAVE] position is inserted.
No cassette is inserted.
The
°: The warning/alarm indication appears when you record yourself. Turn the LCD monitor towards the viewfinder and check the warning/alarm indication.
: No card is inserted.
REMOTE :
An incorrect remote control mode has been selected.
2END:
The tape came to the end during recording. :: The video heads are dirty.
Textual indications
3DEW DETECT/3EJECT TAPE: Condensation has occurred. Take out the cassette and wait for a while. It takes some time until the cassette holder opens, but this is not a malfunction.
LOW BATTERY:
The battery is low. Recharge it.
NO TAPE :
No tape is inserted.
TAPE END:
The tape came to the end during recording.
CHECK REC TAB:
You are attempting to record pictures on a tape with the accidental erasure prevention slider placed in the [SAVE] position.
You are attempting audio dubbing or digital dubbing on a tape with the accidental erasure prevention slider placed in the [SAVE] position.
CHECK REMOTE MODE:
An incorrect remote control mode has been selected. This is only displayed at the first operation of the remote control after
WRONG TAPE FORMAT:
You are attempting to play back a tape
section that has been recorded with a different TV system. This cassette is incompatible.
UNPLAYABLE CARD:
You are attempting to play back data not compatible with this movie camera.
UNABLE TO A.DUB (LP RECORDED): Audio dubbing cannot be performed because the original recording was in LP mode.
UNABLE TO A.DUB:
You are attempting to perform audio dubbing on a
COPY PROTECTED:
Images cannot be recorded correctly because the medium is protected by a copy guard.
CARD ERROR:
This card is not compatible with this movie camera.
You are attempting to format a failed card. It displays, when you attempt to insert the incompatible card to Card Slot.
NO CARD:
No card is inserted.
CARD FULL:
Card does not have sufficient memory remaining.
Select Picture Playback Mode and delete unnecessary files.
NO DATA:
There are not any recorded files on the card.
FILE LOCKED:
You are attempting to erase protected files.
CARD LOCKED:
The write protection switch on the SD Memory Card is set to [LOCK].
NEED HEAD CLEANING:
The video heads are dirty.
PUSH THE RESET SWITCH:
An irregularity in the equipment has been detected. Press the [RESET] button
CHANGE MODE TO USE USB:
The USB cable is connected to the movie camera in Card Recording Mode.
DISCONNECT USB CABLE:
You are attempting to turn the mode dial in PC mode with the USB cable connected to the movie camera. You are attempting to record pictures on a tape/card with the USB cable connected to the movie camera.
NO INK IN PRINTER:
There is no ink. Check the connected printer.
45
VQT0N57
