Playback mode
33
VQT0N57
ªIf the image or audio from this camera

is not output on the TV

≥Check that the plugs are inserted as far as they
go.
≥Check the connected terminal.
≥If the image does not appear on the TV even if
[BASIC] >> [AV JACK] >> [OUT/Ë] are set,
then set to [OUT]. (-42-)
≥Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
ªTo display the on-screen information

on the TV

The information displayed on the LCD monitor or
the viewfinder (operation icon, time code and
mode indication, etc.), date and time can be
displayed on the TV.
1Press the [OSD] button on the remote
control.
≥Press the button again to erase the OSD
information.
Playing back card
≥Set to Picture Playback Mode.
1Operate with joystick.
E: Plays back the previous picture.
D: Plays back the next picture.
1/∫: Slide show (Plays back the still pictures
on the card in order) start/stop
≥While the data on a card are played back, do
not operate the mode dial.
≥When the access lamp is lit, do not insert or
remove a card.
≥It takes time to display the file depending on the
number of pixels of the file.
≥If you attempt to play back file recorded in a
different format or file data is defective, the
whole display becomes bluish and the
“UNPLAYABLE CARD’’ indication may appear
as warning.
≥When playing back a file recorded on other
equipment, the date and time display is different
from when it was recorded.
≥When playing back a picture recorded on other
equipment, its size and that of this movie
camera may appear differently.
ªTo display multiple playback files
Multiple files on the card (6 files on 1 screen) are
displayed.
1Move the [s/VOLr] lever to switch the
images.
Towards [r]: Full-screen disp lay
(Displays 1 image.)
Towards [`]: Multi-screen display
(Displays 6 files on 1 screen.)
≥In the multi-screen display,
≥Move the joystick to select a file (The
selected file will be encircled by a yellow
frame) and press to determine it. The
selected file is full-screen displayed.
≥If there are 7 files or more, then move the
joystick. The next, or previous multi-screen
will be displayed.
ªAbout the compatibility of still

pictures

≥The movie camera is compliant with the unified
standard DCF (Design rule for Camera File
system) established by JEITA (Japan
Electronics and Information Technology
Industries Association).
≥The file format supported by this movie camera
is JPEG. (Not all JPEG formatted files will be
played back.)
≥If an out-of-specs file is played back, the folder/
file name may not be displayed.
≥The movie camera may degrade or not play
back data recorded or created on another
product and another product may degrade or
not play back data recorded on the movie
camera.
OSD DATE/
TIME
ZOOM
PHOTO
SHOT
START/
STOP
PC
GS75EB.book 33 ページ ２００４年１２月２０日　月曜日　午後２時５６分