Settings Using the
OPTION
AUDIO | AUDIO | CH | VOLUME |
| AV |
| |
| VHS/DVD |
|
|
|
| VHS | DVD |
|
|
| |
CANCEL/ | CANCEL/RESET |
| PLAY SPEED |
|
| ||
RESET |
|
| |
|
| SLOW/ | |
| INDEX/SKIP REW SEARCH FF | ||
|
|
| PLAY |
| NAVI | SLOW | MENU |
| DIRECT NAVIGATOR |
| PLAY LIST |
MENU
TOP MENU
Press [34] to select the item and press [2 1] to change the setting.
OPTION
TAPE SELECT | [AUTO] | ||
NTSC INPUT SELECT [AUTO] | |||
NTSC PB SELECT | [onPALTV] | ||
JET NAVIGATOR | [OFF] | ||
DELETE NAVIDATA | [NO] | ||
OSD | [AUTO] | ||
OUT[VHS/DVD] | [AUTO] | ||
DUBBING NORMAL AUDIO [L] | |||
SELECT: |
|
| END :MENU |
|
| ||
ENTER
ENTER
DISPLAYRETURN
PROG/CHECK |
| SET UP | |||
AV ENHANCER | P.MEMORY PLAY MODE | ||||
TIMER | REC MODE | REC | |||
DUBBING | |||||
JET REW | PROG PLAY INPUT SELECT | VHS STATUS | |||
|
|
|
|
| |
GROUP | PICTURE MODE | QUICK REPLAY | DVD STATUS | ||
¬To exit the settings screen Press [MENU] twice.
VHS
STATUS
Items | Settings (Underlined items are the initial setting.) | |
|
|
|
TAPE SELECT | AUTO: | E30, E60, E90, E120, E180 and E240 tapes |
Set the length of tape you are using so the unit can show the correct | E195: | E195 tapes |
remaining time (l 25). | E260: | E260 tapes |
| E300: | E300 tapes |
|
|
|
NTSC INPUT SELECT | AUTO: | NTSC [4.43] and [3.58] signals |
Select the colour TV system used to record NTSC signals. | ≥If the tape has not recorded correctly, select 4.43 or 3.58. | |
| 4.43: | NTSC 4.43 signals |
| 3.58: | NTSC 3.58 signals |
| ≥Some programmes on NTSC 3.58 system cannot be recorded | |
| correctly at this position. | |
|
| |
NTSC PB SELECT | on PAL TV: TVs that can receive PAL signals | |
Select the colour TV system of the TV used to play back a tape | 4.43: | TVs that can receive NTSC 4.43 signals |
recording NTSC signals. | 3.58: | TVs that can receive NTSC 3.58 signals |
|
|
|
JET NAVIGATOR (l 20) | ON: | Jet Navigator data automatically registered. |
| OFF: | Data not registered. |
|
|
|
DELETE NAVIDATA (l 20) | NO | If you choose this position, press [ENTER] to delete |
| ENTER: | |
|
| all the Jet Navigator data. |
|
|
|
OSD (l 25) | AUTO: | Messages appear on the TV for about 5 seconds |
|
| when you press [VHS STATUS]. |
| OFF: | Messages do not appear. |
|
|
|
OUT [VHS/DVD] (l 12) | VHS: | Only VHS outputs |
You can set the unit so that the output is automatically switched to | MANUAL: | VHS output and DVD output are manually switched. |
the device which starts playback. | AUTO: | VHS and DVD are automatically switched depending |
|
| on the manipulation or the unit operation. |
|
|
|
DUBBING NORMAL AUDIO (l 42) | L: | To record the sound from left channel |
Select the audio channel to be recorded on the Normal audio track | R: | To record the sound from right channel |
when dubbing a bilingual DVD. |
|
|
|
|
|
24
