Panasonic PT-50LCZ70 About, Reset, Press to select “Version” or “License”, Advanced Operation

	To conserve energy, this Projection Display
	automatically turns off when NO SIGNAL continues
	more than 10 minutes.
	Notes
No signal	• Not in use when setting “PC”, “Photo viewer mode”,
shut-off	“Lock”, or Digital channel.
	• “No signal shut-off was activated” will be displayed
	for about 10 seconds when this Projection Display is
	turned on for the first time after turning the power off
	by “No signal shut-off”.
	• The on-screen display will flash 3, 2 and 1 to
	indicate the last three (3) remaining minutes prior to
	the shut-off.
	To conserve energy, this Projection Display
	automatically turns off when no operation of remote or
	front panel key continues more than 3 hours.
	Notes
No action	• Not in use when setting “PC”.
shut-off	• “No action shut-off was activated” will be displayed
	for about 10 seconds when this Projection Display is
	turned on for the first time after turning the power off
	by “No action shut off”.
	• The on-screen display will flash 3, 2 and 1 to
	indicate the last three (3) remaining minutes prior to
	the shut-off.

About

Display the TV set Version and Software License.

Procedure

1.Press ▲▼ to select “About”.

2.Press OK to display the About screen.

Setup2/2

Other adjust

About

Reset

3.Press ▲▼ to select “Version” or “License”.

4.Press OK to display the Version or License screen.

About

Version

License

Reset

Setup is reset.

Procedure

1.Press ▲▼ to select “Reset”.

2.Press OK to display the password screen.

Setup2/2

Other adjust

About

Reset

3.Enter your password by pressing the NUMBER keys to reset the Setup settings.

Password

Enter password.

----

0 - 9

4.The confirmation screen is displayed. Select “Yes”, and press OK.

Reset

Reset all settings to default.

YesNo

Reset

Reset in progress. Please refrain from any activity. Do not turn off or unplug the TV.

Notes

•Performing Reset will clear all items set with Setup, such as channel settings. Use Reset with care.

•POWER indicator flashes red. After flashing stops, unplug the unit then plug it back in and turn power ON.

•When using “EZ Sync™ “HDAVI Control™””, with the device connected, set “EZ Sync” first to “Off” and then “On” using the Setup Menu. (p. 52-53)

Advanced Operation

55