Panasonic PT-50LCZ70 PC Adjust, Other Adjust, Press to select “PC adjust”, Advanced Operation

Depending on the signal being input, some menu items may or may not be adjustable and some functions may or may not be available.

PC Adjust

You can adjust the picture when “Input select” is selected to “PC”. (p. 29)

Procedure

1.Press ▲▼ to select “PC adjust”.

2.Press OK to display the PC adjust menu.

Picture	2/2
Color temp.	Warm
Color mgmt.	On
AI picture	Off
Pro setting
Zoom adjust
PC adjust
Other adjust

3.Press ▲▼ to select each item.

4.Press ◄► to adjust each item.

PC adjust
Normal	No
Sync	H & V
Dot clock	-3
H-position	0
V-position	0
Clock phase	0
Input resolution	VGA
H-frequency	31.4kHz
V-frequency	60.0Hz

Item	Explanations
Normal	Resets all picture adjustments to factory default
	settings.
	• H&V : The H and V sync signals are input from
Sync	the HD/VD connector.
	• On G : Uses a synchronized signal on the Video
	G signal, which is input from the G connector.
Dot clock	Adjusts horizontal size.
H-Position	Adjusts horizontal position.
V-Position	Adjusts vertical position
	Adjusts in order to remove any picture
Clock phase	interference or contour blurring which may occur
	in computer images.
Input	Switches to wide display.
	Input signal switched from XGA to WXGA and
resolution
	from VGA to WVGA.
	Displays the frequencies of the PC signal
H-Frequency/	currently being adjusted.
	Displays the H (Horizontal) / V (Vertical)
V-Frequency	frequencies.
	Display range: Horizontal	15-110 kHz
	Vertical	48 - 120 Hz

Note

•This function is available only when the signal being viewed is from a PC.

Other Adjust

Other detailed picture adjustments can be made. This function is not available when “Input select” is selected to “PC”. (p. 29)

Procedure

1.Press ▲▼ to select “Other adjust”.

2.Press OK to display the Other adjust menu.

Picture	2/2
Color temp.	Warm
Color mgmt.	On
AI picture	Off
Pro setting
Zoom adjust
PC adjust
Other adjust

3.Press ▲▼ to select each item.

4.Press ◄► to adjust each item.

Other adjust
Video NR	On
3D Y/C filter	On
Color matrix	SD
Block NR	On
Mosquito NR	On
Black level	Dark
3:2 pulldown	On

Item	Explanations
Video NR	Reduces noise, commonly called snow. Leave off
	when receiving a strong signal.
3D Y/C filter	Minimizes noise and cross-color in the picture.
	Select SD or HD.
	• SD : Color matrix is set same as a normal TV
	system (NTSC).
	• HD : Color matrix is set same as a
	High-Definition system (ATSC).
	With a 480p signal from equipment connected
	to COMPONENT VIDEO INPUT (Y, PB, PR) or
Color matrix	HDMI INPUT terminals or from the unit’s DTV
	tuner, you can select SD or HD color matrix to
	display the most natural color.

	Notes
	• This feature is available only with 480p signals.
	• The default setting with HDTV signals (720p,
	1080i or 1080p) is HD color matrix.
	• The default setting with NTSC signals (480i) is
	SD color matrix.
Block NR	Reduces noise of specific digital signals of DVD,
	STB, etc.
Mosquito NR	Reduces HDTV flicker noise in the contoured
	sections of an image.
	Select Light or Dark [Dark : VIDEO, Light :
Black level	480i/480p/720p/1080i/1080p] Invalid for Digital
	channel, Analog channel, PC and Photo viewer.
3:2 pulldown	Transfers film to video.

Advanced Operation

37