Panasonic PT-AE700 operating instructions Turning on the power

Turning on the power

Before turning on the power

1.Ensure that all peripheral devices are connected properly.

2.Connect the accessory mains lead.

3.Remove the lens cover.

$˛

&˛

(˛

Power indicator

Mains lead

#˛

*˛ '˛ ˛) ˛(

Lens cover

& Press the input select button to select the input signal.
	Input select
	button
Control		VIDEO	S-VIDEO	YPBPR
panel	Changing
	signals	HDMI	PC	SCART
	Input select	EO	CMPN T
	button	VID
Remote
		VIDEO	YPBPR	PC	operation
control	Changing
unit
	signals
		S-VIDEO	SCART	HDMI
BA picture will be projected in accordance with the selected input signal.
					Basic
Follow the procedure below when you set the projector up first, and when
you change the setup place.

Adjusting the lens shift
'BUse the shift lever to adjust the
position of the projected image.
BTurn the shift lever right to secure	˛'
the shift lever.

#Presspower.the MAIN POWER switch to turn on the

BThe power indicator on the projector will illuminate red.

$Press the POWER button.

BThe power indicator on the projector will flash green. After a short period, the indicator will illuminate green, and a picture will be projected.

%Turn on the power of all connected devices.

BStart the play function of a device such as a DVD player.

NOTE:

BA rattling sound may be heard when the power is turned on, and a tinkling sound may be heard when the lamp unit is turned on, but these are not signs of malfunctions.

Adjusting the angle
(BThe position of the projected image
(upward and downward) can be fine
adjusted by turning the front
adjustable legs.	˛(	(˛
BIf the projected image contains
keystone distortion, adjust
“KEYSTONE” (refer to page 28 for
details).
Adjusting the size	˛)Zoom
)BTurn the zoom ring to adjust
the size of the projected image.	˛*Focus
Adjusting the focus
*BTurn the focus ring to adjust
the focus of the projected image.

24-ENGLISH ENGLISH-25