Turning off the power

˛#

˛%

$˛

NOTE:

operation

Power indicator

#Press the POWER button.

B“POWER OFF” is displayed on the

screen.

POWER OFF

OK CANCEL

BDuring projection of an image, the cooling fan will operate, emitting a small noise as it operates. Turning the lamp on or off will cause this noise to increase a little.

BBy using the “OPTION” menu to set “LAMP POWER” to “LOW”, the operating sound of the fan can be reduced. (Refer to page 47.)

BYou can also turn off the power by pressing the POWER button twice or by holding it down for at least 0.5 seconds.

BWhen the projector is in standby mode (the power indicator on the projector is illuminated red), the projector continues to draw approximately 3.0 W of power even when the cooling fan has stopped.

Basic

$Press the I or H button to select “OK”, and then press the ENTER button.

BThe lamp unit will switch off and the picture will stop being projected. (The power indicator on the projector will illuminate orange while the cooling fan is still operating.)

%Press the MAIN POWER switch to turn off the power after the power indicator on the

projector illuminates red.

BDo not cut power to the projector in any way while the cooling fan is still operating. Be careful not to switch off the MAIN POWER switch of the projector or unplug the mains lead from the mains socket.

Power indicator

Power indicator status

Projector status

Red

Illuminated

The projector is in standby mode and image projection

is possible by pressing the POWER button.

 

 

 

 

 

 

 

The projector is preparing for projection after the

 

Flashing

power is turned on while the power indicator is

Green

illuminated red. (After a short period, a picture will be

 

 

 

projected.)

 

Illuminated

A picture is being projected.

 

 

 

 

Illuminated

The lamp is cooling down after the power is turned

 

off. (The cooling fan is operating.)

 

 

Orange

 

The projector is preparing for projection after the

 

power is turned on while the power indicator is

 

Flashing

 

illuminated orange. (After a short period, a picture

 

 

 

 

will be projected.)

 

 

 

26-ENGLISH

ENGLISH-27

Page 14
Image 14
Panasonic PT-AE700 operating instructions Turning off the power, #Press the Power button, Power indicator, Projector status