When inserting the batteries, make sure the polarities (+ and
BIf the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.
Use only the specified batteries.
BIf incorrect batteries are used, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.
Do not mix old and new batteries.
BIf the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.
Do not put your weight on this projector.
BYou could fall or the projector could break, and injury may result.
BBe especially careful not to let young children stand or sit on the projector.
Disconnect the mains plug from the mains socket as a safety precaution before carrying out any cleaning.
BElectric shocks can result if this is not done.
Ask an Authorised Service Centre to clean inside the projector at least once a year.
BIf dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation.
BIt is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your nearest Authorised Service Centre to clean the projector when required. Please discuss with the Authorised Service Centre regarding cleaning costs.
We are constantly making efforts to preserve and maintain a clean environment. Please take non repairable units back to your dealer or a recycling company.
Accessories
Check that all of the accessories shown below have been included with your | Preparation | ||
projector. |
|
| |
|
|
| |
|
|
|
|
Remote control unit | Video cable | AAA batteries for |
|
(N2QAEA000025 x1) | [3.0 m (9´10˝), | remote control unit (x2) |
|
| K2KA2FA00003 x1] |
|
|
Mains lead for | Mains lead for U.K. |
Continental | (K2CT3FR00003 x1) |
(K2CM3FR00002 x1) |
|
Before use
Cautions regarding
Avoid setting up in places which are subject to vibration or shocks. The internal parts can be damaged, which may cause malfunctions or accidents.
Do not set up the projector near
The projector may be subject to electromagnetic interference.
If installing the projector to the ceiling, ask a qualified technician to carry out all installation work.
You will need to purchase the separate installation kit (Model
If using this projector at high elevations (above 1 400 m), set the “FAN CONTROL” to “HIGH”. (Refer to page 47.)
Failure to observe this may result in malfunctions.
