MODE
This sets the image which is displayed on the screen when the SD memory card is inserted.
MODE
PRESENTATION
ADJ 
RETRN
PRESENTATION
This mode is used for making a presentation without using a computer.
SLOW
About 30 seconds
NOTE:
BIt may take time for the images to be displayed on the screen depending on the images. In such cases, the play interval may become longer than the set time.
EFFECT
CHECKER
An image is divided into checker pattern, and the next image appears.
SLIDE IN
The next image slides into the present image.
RANDOM
The various effects will be applied at random every time the image is switched.
AUDIO
ON
The sound is played back when a file which contains sound is played back.
OFF
The sound is not played back when a file which contains sound is played back.
If there is only one
“PRESENTATION” folder, the first image will be played back.
If there is more than one folder, the SD selection screen will be displayed.
MANUAL
The SD selection screen will be displayed.
AUTO PLAY
This sets the playback method for still images.
ON
The slide show will begin from the selected file.
The files contained in the same folder will be played back in order.
OFF
Only the selected file will be played back.
INTERVAL
This sets the duration of the period to change to the next file in the slide show.
INTERVAL NORMAL
[
FAST
[
SLOW
NORMAL
About 10 seconds
FAST
About 5 seconds
This sets the effect that is applied when switching the still images in a slide show.
EFFECTOFF
[
WIPE
[
FADE
[
SPLIT
[
BLIND
[
CHECKER 
[
SLIDE IN 
[
RANDOM
OFF
No effect is applied.
WIPE
An image is wiped by the next image from the left side.
FADE
An image darkens gradually and the next image appears in turn.
SPLIT
An image is split from the center and the next image appears.
BLIND
An image is divided into stripe pattern, and the next image appears.
Making a presentation without using a computer
You can make a smooth presentation without using a computer by following the procedures below.
Preparation
#Use ImageCreator 1.5 to convert the format of Microsoft PowerPoint presentation file to a format that can be played back by this projector.
$Store only one “PRESENTATION” folder created by ImageCreator 1.5 in the SD memory card.
%Set “MODE” in the “SD PICTURE SETUP” menu to “PRESENTATION” (page 38).
# Connect the accessory power cord to the AC IN socket and insert the power cord plug into the wall outlet.
$ Insert the prepared SD memory card into the SD memory card slot.
The lamp will turn on automatically, and the first image in the “PRESENTATION” folder will be played back.
NOTE:
BIf there is more than one “PRESENTATION” folder, the SD selection screen will be displayed so that you can select a folder.
%Operate by using the SD operation buttons. (Refer to page 18.)
Useful functions
