With a PC
3 Click the [Video Stream Driver].
• The set up program starts running.
4 For Windows XP users:
Depending on your system environment, installation of “DirectX9.0b” may be required. Click [Yes] and continue with installation.
•After “DirectX9.0b” is installed, the computer will restart.
•Do not remove the
5 Finish installation by following the on-screen instructions.
•Click [Next] and proceed with installation.
•After completing the installation, click [Finish].
6 After the Video Stream Driver is installed, please restart your computer.
Connecting the Camcorder to Personal
Computer (For Using as a Web Camera)
1 Set the Camcorder to Tape Recording Mode or Tape Playback Mode.
•To send the live camera picture to a PC, set the Camcorder to Tape Recording mode.
•To send pictures recorded on a tape to a PC, set the Camcorder to Tape Playback mode.
2 Connect the Camcorder to your personal computer with USB Cable.
•When the Camcorder and personal computer (with Windows 2000) are connected via USB Cable, a message, such as the one below, is displayed. However, testing by the manufacturer has confirmed functionality of this Camcorder with Windows 2000. Click [Yes] and proceed.
•For Windows 98SE/Me users, “USB Audio Device” is required. Click [Next] and proceed.
•If you use Windows 98SE, the OS installation CD may be required.
Windows 98SE/Me Users
The following messages may be displayed when connecting this Camcorder and your personal computer via USB Cable.
1)The message “The file ‘kstvtune.ax’ on [Unknown] cannot be found...” is displayed.
•Enter “C:\Windows\system” for Windows 98SE. Enter “C:\Windows\options\CABS” for Windows Me.
•If the “kstvtune.ax” file is missing in one of the 2
2)The message “The file ‘ksclockf.ax’ on [Unknown] cannot be found...” is displayed.
•Enter “C:\Windows\system”.
•If the “ksclockf.ax” file is missing in the above
mentioned folder, insert the OS
•You may click [Browse] to look for and assign the path.
43
