Before Using
How to remove the Sensor tag
Hand Strap
1 Open the Hand Strap as illustrated
at left.
2 Remove the Sensor tag.
Then, replace the Hand Strap.
Sensor tag
Getting Started
Attaching Shoulder Strap
Remove Battery Pack before completing the following steps:
1 Undo strap ends
from buckles.
2 Thread strap ends through Strap Rings on Camcorder.
Adjust the Length of the Shoulder Strap
Pull a loop of strap from buckle, then pull strap tight to shorten or lengthen.
Hand Strap
3 | 2 |
1 |
ends into buckles.
Adjust Hand Strap length to fit your hand as min. 25.4 mm (1 inch) shown.
Lens Cap
Attaching the Lens Cap Strap to the Hand Strap: Remove the Hand Strap from the front clasp and thread the Strap through the loop in the Lens Cap Strap. Reattach the Hand Strap.
13
