19
Basic Operation
Before you begin...
•Connect Camcorder to power source.
•Insert cassette with record tab (page 12).
Camera Recording
1Set POWER to
CAMERA.
2Press MENU for
MENU mode.
Press UP or DOWN to select
STAND-BY RELEASE .
3Press M.FOCUS to select ON or OFF.
ON : From Stand-by mode, press
RECORD/PAUSE two times to
resume recording.
OFF : From Stand-by mode, set
POWER to OFF, then to
CAMERA. Press RECORD/
PAUSE to record.
4Press MENU to exit.
Stand-by Quick Release
If left in RECORD/PAUSE mode for 5
minutes, Camcorder switches to Stand-by
mode to conserve battery. When set to
ON, Stand-by Quick Release lets you
resume recording by pressing RECORD/
PAUSE two times. Stand-by Quick Release
is set to OFF at the factory.
aPress RECORD/PAUSE to stop
recording.
bSet POWER to OFF and leave
cassette in Camcorder.
cTo resume recording, set POWER to
CAMERA.
dPress RECORD/PAUSE to resume
recording.
Note:
• Use Manual Easy Edit (left) if more than
24 hours before recording is resumed.
Manual Easy Editing
For a smooth transition between scenes if
recording is stopped, and then started
within 24 hours.
For proper continuity when taping from Stop
mode or after attaching a new Battery.
Easy Edit Stand-by
ASet POWER to VCR.
BaPress (REWIND/SEARCH) to
rewind a few seconds of tape.
bPress (PLAY/STILL) to review
recording.
cPress (PLAY/STILL) where
you want to continue recording.
CSet POWER to CAMERA.
DPress RECORD/PAUSE to resume
recording.
B
1,
A
,
C
,

b, c

D,
a, d
2, 3, 4
abc
03.L454 Basic p18-20 03.11.17, 0:53 PM19