Panasonic PV-SD4090 Beep, Before you begin, Press Menu to exit Digital Camera will beep

Beep

Set Digital Camera to beep (low or high volume), when an image is captured, or set to OFF.

Before you begin

Set the POWER Switch to REC, MANUAL REC or PLAY. (See pages 19~20.) Press MENU to display the MENU screen.

OFF

REC PLAY

PC

1
VOL+
- +	2
VOL-

Note

•You can select BEEP mode in the REC, MANUAL REC and PLAY mode.

•If you change the setting, repeat step 2.

Capturing Images

1 Press or to select BEEP and Press or to select one of the three settings shown below.

<REC mode>		<MANUAL REC mode>
<REC MENU 2/2>		<MANUAL REC MENU 3/3>
BEEP	LOW	BEEP	LOW
SEL	: SET :	SEL	: SET :
EXIT	: MENU	EXIT	: MENU

OSD		ON	Basic
<PLAY mode>
<PLAY MENU 2/2>
SLIDE SHOW
BRIGHTNESS			Operation
CLOCK SET
BEEP		LOW
SEL	:	SET :
EXIT	: MENU

OFF : Select to turn OFF the beep sound.

LOW : Select to hear a low beep sound.

HIGH : Select to hear a loud beep sound.

2 Press MENU to exit.

Digital Camera will beep:

•Once when the BEEP is set to LOW or HIGH in the MENU mode as follows. When you press the REC MODE, MENU or FLASH buttons.

When you press the , , , or buttons while adjusting Brightness, Iris and Volume.

When you press the or button while adjusting Brightness, Iris and volume.

•Twice when you press the shutter button half way to adjust the focus.

27

SD4090.p22-33.p65 27 99/11/11, 16:39