Panasonic PV-SD4090 Connection, Power Switch, USB Cable supplied USB Terminal

Transferring Your Images (Windows 98)

By using the included USB cable to connect to a PC, you can use your SuperDisk camera as an external storage device.

*The SuperDisk Diskette is only supported by Windows 98 or Mac OS 8.1 or later.

For other operating systems, you should use Floppy Disk.

TO PC Terminal

REC OFF PLAY 2

MANUAL	PC
REC

POWER Switch

Personal Computer

3

1

USB Cable (supplied)

USB Terminal

Connection

1 Turn on your PC.

2 Set the POWER Switch to PC on the Digital Camera.

•The POWER LED lamp lights up.

•LCD Viewfinder is off in PC mode.

3 Connect the Digital Camera to your PC (Windows) using the USB Cable (supplied).

• You can use this Digital Camera as a SuperDisk Drive. (See pages 61, 62, 63, 65.)

Note

•For extended periods of use, it is recommended to use the AC Adaptor (supplied) as a power source.

•Once the USB driver is installed, the Digital Camera can be connected even after the PC has been started. The USB Cable (supplied) must be connected as described in the above steps.

48 For assistance, call 1-800-272-7033.

SD4090.p45-66.p65 48 99/11/11, 16:40