Panasonic PV-SD4090 operating instructions Access LED

Inserting the SuperDiskTM Diskette or Floppy Disk

Note

•Do not bend, drop, apply high pressure or subject the Disk Media to strong shocks.

•Do not store it in places with high temperature, high humidity, a lot of dust, or static electricity and strong electromagnetic waves.

•Keep the Disk Media’s contacts free from dust, water or other foreign substances. Do not touch them with your fingers, etc.

•Do not disassemble or deform the Disk Media.

•Be sure to make a backup copy of important data.

•Make sure that you do not insert the Disk Media in the wrong direction.

•Do not, under any circumstances, eject the Disk Media immediately after pressing the SHUTTER Button (during recording of an image) or while deleting (when “PLEASE WAIT” is displayed). This could damage the format of the Disk Media and make them unusable.

•When the Disk Media does not eject after pressing the EJECT Button, push the Disk Media fully into the slot again and then press the EJECT Button firmly.

•“NO DISK” will appear on the LCD Viewfinder when the Disk Media is not inserted.

•“DISK ERROR” will appear on the LCD Viewfinder if the Disk Media is defective.

Caution

•The ACCESS LED lamp will flash when the Digital Camera is accessing the Disk Media. Please never expose this unit to large vibrations or impacts while ACCESS LED lamp is flashing. And, do not turn off the Power, take out a Disk Media, or remove the battery when ACCESS LED lamp is flashing.

ACCESS LED

For additional information regarding Imation SuperDisk products, please call 1-888-466-3456.

18 For assistance, call 1-800-272-7033.

SD4090.p1-21.p65 18 99/11/11, 16:38