Panasonic PV-SD4090 Time Lapse Recording, Time Lapse feature is available with

1 Press

Time Lapse Recording

Time Lapse enables you to set the camera to automatically capture an image from once every minute to once every 24 hours.

Before you begin

Set the POWER Switch to MANUAL REC. (See pages 19~20.)

OFF

REC PLAY

MANUAL	PC
REC

or to select TIME LAPSE and press to select time interval. You can select a capture rate of approx. 1MIN, 5MIN, 10MIN, 30MIN, 1HOUR, 6HOUR, 12HOUR, or 24HOUR.

<MANUAL REC MENU 2/3>

WHITE BALANCE			AUTO
LIGHT METER			AUTO
SLOW SHUTTER			OFF
TIME LAPSE			OFF
CLOCK SET
SEL	:	SET	:
EXIT	: MENU

				• Time Lapse feature is available with
				Super Fine (SF), Fine (F), Normal (N) and
				Zoom mode.
				If the REC mode is set to	or , please
				change REC mode. (See page 26.)
				2 Press MENU to set time lapse mode.
					TIME LAPSE MODE
					PUSH SHTR TO START
					PUSH MENU TO EXIT
VOL+				10	F
-	+			3 Press SHTR to start time lapse mode
VOL-		2, 3
				recording.
1					TIME LAPSE MODE
			3		PUSH MENU TO EXIT
				10	F

• REC will blink on the LCD Viewfinder while image is being processed.

• Press MENU to exit this mode.

Note

• During time lapse recording (even during non-recording intervals), the battery may become depleted. Therefore, using an AC Adaptor (supplied) is recommended.

Special Features

39

SD4090.p34-44.p65 39 99/11/11, 16:40