Panasonic SC-HT441W manual Preparing the remote control, Performing QUICK SETUP, Use, Simple Setup

Simple Setup

HT441WEn.bookPage10	Friday,June9,20065:43PM	≥attempt to recharge alkaline or manganese batteries.
STEP6	Preparing the remote control
		Do not:
Remote control	Batteries	≥mix old and new batteries.
		≥use different types at the same time.
		≥heat or expose to flame.
		≥take apart or short circuit.
2 Insert so the poles (i and j) match those in the remote control.		≥use batteries if the covering has been peeled off.
3		Mishandling of batteries can cause electrolyte leakage which can
		severely damage the remote control.
		Remove the batteries if the remote control is not going to be used for a
		long period of time. Store in a cool, dark place.
	1 ≥Do not use rechargeable type	∫ Use
	batteries.	Aim at the display (➜ page 11), avoiding obstacles, at a maximum

R6/LR6, AA

range of 7 m (23 feet) directly in front of the unit.

Preparing the remote control / Performing QUICK SETUP

STEP7 Performing QUICK SETUP

The QUICK SETUP screen assists you to make necessary settings.

To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).

≥To change your television’s video input mode, refer to its operating instructions.

≥This remote control can perform some basic television operations (➜ page 31).

DVD	1	Turn on the unit.
	2	Select “DVD/CD”.
	3	Press and hold to show
		the QUICK SETUP
		screen.
ENTER	4	Select Follow the messages
RETURN,
SETUP		and make the settings.

Register

RQT8779

10

5	Press to finish QUICK
ENTER	SETUP.
6	Press repeatedly to exit.

To change these settings later

Select “QUICK SETUP” in the “Others” tab (➜ page 24).