Clock and timers
Setting the clock
This is a
1
2
3
Press [CLOCK/TIMER] to show the clock for a few seconds.
Note:
• Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set time.
Press [SLEEP] repeatedly to select the setting (in minutes).
To cancel, select “Off”.
30min > 60min > 90min > 120min > Off
b |
To show the remaining time
Press [SLEEP].
Note:
•The sleep timer can be used together with the play timer.
•The sleep timer always comes first. Be sure not to set an overlap of timers.
VQT5J68
Play timer
You can set the timer to come on at a certain time to wake you up.
Preparation
Set the clock.
1 Press [CLOCK/TIMER] repeatedly to select “TIMER Adjust”.
2 Within 8 seconds, press [3, 4] to set the start time. 3 Press [OK].
4 Do steps 2 and 3 again to set the end time.
To start the timer
1 Prepare the audio source you want to listen to and set the volume.
2 Press [F, PLAY].
“F” is shown.
To cancel, press [F, PLAY] again.
The system must be switched off for the timer to operate.
To check the settings
Press [CLOCK/TIMER] repeatedly to select “TIMER Adjust”.
Note:
•The timer starts at a low volume and increases gradually to the preset level.
•The timer comes on at the set time every day if the timer is on.
•If you switch off the system and switch on again while a timer is in operation, the timer will not stop at the end time.
Sound effects
Changing the sound quality
1 Press [SOUND] to select a sound effect.
2 Press [2, 1] to select the desired setting.
BASS | ||
TREBLE | ||
| ||
Surround | “On Surround” or “Off Surround” |
By main unit only
Turn [BASS] or [TREBLE] to adjust the level.
Preset EQ
Press [PRESET EQ] to select a setting.
Heavy | Adds punch to rock |
Soft | For background music |
Clear | Clarifies higher frequencies |
Vocal | Adds gloss to vocal |
Flat | Cancels the sound effect |
D.BASS
This function lets you enjoy a powerful bass effect.
Press [D.BASS] to select “On D.BASS” or “Off D.BASS”.
Using the auxiliary input
You can connect a VCR, DVD player etc. and listen to the audio through this system.
Preparation
Connect the external equipment.
1 Press [SELECTOR] repeatedly to select “AUX”.
2 Play the external equipment.
14
