| USB PRG PGM TG RND D.MIX | SLP MONO STCT | DDTS |
| |
| SD | SFC | REC | ||
| EQ H.BASS | VS | |||
| RDS | W1 W2 WS | |||
|
|
|
|
| |
1 Lights when disc is ready to use. | : Dolby Digital indicator |
|
|
| |
2 Lights when the unit outputs progressive video signal. | Lights when Dolby Digital decoder is being used. | ||||
3 Program playback indicator (➜ page 57) | ; DTS indicator |
|
|
| |
4 T: Title number/Track number | Lights when DTS decoder is being used. |
| |||
G: Group number | < Timer setting indicator (➜ page 85) |
|
| ||
5 Random playback indicator (➜ page 54, 57) | Lights when the scheduled timer recording is set. | ||||
6 D.MIX indicator | = Dolby Pro Logic II indicator (➜ page 83) |
| |||
When off: | > Recording indicator (➜ page 34) |
|
| ||
When lit: | The disc prevents | ? Dolby Virtual Speaker indicator (➜ page 83) |
| ||
| front channels can be played. | @ Multiroom indicator (➜ page 80) |
|
| |
7 SLEEP indicator (➜ page 86) | A Main display section/Progress indicator (➜ below) | ||||
8 Radio broadcast display (➜ page 62) | B Equalizer indicator (➜ page 82) |
|
| ||
ST: | Stereo | C Repeat play indicator (➜ page 54, 58) |
| ||
MONO: | Monaural | D H.BASS indicator (➜ page 82) |
|
| |
9C: Content number
T: Track number
≥Indicators on the front display for functions that this unit does not support will not light.
Getting Started
Read Me First
The progress of the following operations:
–importing MP3/WMA to the HDD
–conversion and analysis of data on the HDD
–compression of data on the HDD
–division/combination of LPCM tracks
–
–restoring of data to the HDD
is indicated on the unit's display as shown on the right:
12.5% completed
25% completed
37.5% completed
50% completed
100% completed
Insert | Press [<OPEN/CLOSE] on the main unit to open the tray and |
| insert a disc. (Press the button again to close the tray.) |
| ≥It is not possible to play continuously from one side of a |
| double sided disc to the other. You will need to eject the disc |
| and turn it over. |
| ≥[RAM] Remove the disc from its cartridge before use. |
Unit care
The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette smoke can also cause the unit to break or malfunction.
Clean this unit with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit. ≥Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Do not use commercially available lens cleaners as they may cause malfunction. Cleaning of the lens is generally not necessary although this depends on the operating environment.
The heat can damage the unit.
[Note]
Do not obstruct the rear panel’s internal cooling fan.
Before moving the unit, ensure the disc trays are empty. Failure to do so will risk severely damaging the discs and the unit.
RQT8926
29