To stop recording

Press [∫].

Tracks that are stopped partially through recording (incomplete recordings) will not be recorded to the HDD.

≥Additionally, nothing will be recorded if the current recording is stopped in the index portion (e.g. when “j0:03” etc. is displayed) between two tracks.

To select the track to start recording with

[Possible only when the recording method is set to “Listening while Recording” (➜ page 34, step 5)].

1Press [TOP MENU], and the track list will be displayed.

2Press [3 4] to select the track to start recording with and press [ENTER].

3Press [¥ HDD REC].

Recording starts from the selected track and continues to the end of the CD.

To record a track while playing

[Possible only when the recording method is set to “Listening while Recording” (➜ page 34, step 5)].

While the disc is playing, press [¥ HDD REC].

≥Playback stops, and then restarts from the beginning of the track being played and records until the end of the disc.

To return to the previous screen

Press [RETURN].

[Note]

≥Recordings cannot be paused.

≥No audio can be heard during high-speed recording. ≥The response to adjustments made to the volume while

recording may be a bit slow, however this is not an indication of any problem.

≥During high-speed recording, the elapsed time and status bar shown on-screen may appear to have stopped, but this is not an indication of a problem.

≥When listening while recording audio from CDs that have no intermissions between tracks (e.g. DJ mix CDs), there may be some distortion when switching tracks. (However, this has no effect on the quality of the recording itself.)

≥Recording or play of CDs, etc. with copyright restrictions that are not in compliance with CD standards is not guaranteed.

≥Some music CDs have SCMS (Serial Copy Management System) restrictions. Due to copyright protection restrictions, these types of CDs cannot be recorded to the HDD.

[Tips]

≥If “The CD has already been recorded.” is displayed, the unit is trying to record a CD again that has previously been recorded. Follow the on-screen menu and select the appropriate operation.

Add to this Album playlist:

The CD will be recorded and added in the Album playlist of the CD (which has already been recorded). If the album title has been changed since it was recorded first, this item cannot be displayed.

Record as a New Album:

The CD will be recorded as a different album. The recorded album will be named “XXXXX (Name of the Album)~XX (Number)”.

Cancel:

Recording will be canceled.

Recording to HDD Basic Operations

RQT8926

35