Panasonic SCPTX7 Changing the network settings, Common procedures, To check the IP Address, etc, Manually setting the IP address, Manually setting the DNS server

Changing the network settings

HDD BAND

SELECT

VOLUME

CANCEL

STOP PAUSE PLAY

MENUPLAYLISTFUNCTIONS

	NETOUCH PL
	O	AY
N	U		T
E			S
E			A
M			R
P			T
O			T
T
ENERGETIC MELLOW		RELAXING EMOTIONAL
HDDREC CH SELECT		FAVORITE 2ND
		REG	SELECT
PLAYMODE FL DISPLAY		SLEEP	VS

SETUP SOUND SELECT MUTING

These settings are used if you will connect this unit to a network.

Preparation

1To display the picture turn on the television and select the appropriate video input to suit the connections to this unit.

2Press [Í].

Common procedures

1 Press [SETUP].

2 Press [3 4] to select “Other Setup” and press [ENTER]. 3 Press [3 4] to select “Network” and press [1].

4 Press [3 4] to select “Network Settings” and press [ENTER].

The network connection status is displayed.

Network Settings

TCP/IP 1	Auto Setting
TCP/IP 2	Auto Setting
IP Address

Connected to network.

Manually setting the IP address

In most cases, default settings can normally be used without making any changes.

When connecting this unit to a network and assigning a fixed IP address, perform the following settings.

After performing steps 1–4 (➜ above)

5 Press [3 4] to select “TCP/IP 1” and press [ENTER].

6 Press [3 4] to select “IP Manual Setting” and press [ENTER].

7 Press [3 4] to select the item to be set and press [ENTER].

IP Manual Setting
IP Address	0.	0.	0.	0
Subnet Mask	0.	0.	0.	0
Gateway	0.	0.	0.	0

8 Enter numbers with the numbered buttons and press [ENTER].

≥After checking the specifications for your broadband router, enter each number.

≥The numeric input range is between 0 and 255.

Repeat steps 7–8, and enter numbers for other items.

To return to the previous screen

Press [RETURN].

To exit the screen

Press [RETURN] several times.

If you made an input mistake

Move the cursor with [2 1] and make corrections with the numbered buttons.

To delete settings and use default settings

Select “IP Auto Setting” in step 6 and press [ENTER].

Manually setting the DNS server

In most cases, default settings can normally be used without making any changes.

When setting an assigned DNS server from your ISP, perform the following settings.

After performing steps 1–4 (➜ left)

5 Press [3 4] to select “TCP/IP 2” and press [ENTER].

6 Press [3 4] to select “DNS Manual Setting” and press [ENTER].

≥If “TCP/IP 1” is set to “IP Manual Setting”, the “DNS Auto Setting” will not be displayed.

7 Press [3 4] to select the item to be set and press

[ENTER].

DNS Manual Setting
Primary DNS Address	0.	0.	0.	0
Secondary DNS Address	0.	0.	0.	0

	8 Enter numbers with the numbered buttons and press
	[ENTER].
	≥Follow the instructions given by your ISP and enter the
	numbers.
	≥The numeric input range is between 0 and 255.
	Repeat steps 7–8, and enter numbers for other items.
		settings
	To return to the previous screen	settings
	To return to the previous screen
	Press [RETURN].
	To exit the screen	unit’s
	Press [RETURN] several times.	unit’s
	Press [RETURN] several times.
	If you made an input mistake	the
	Move the cursor with [2 1] and make corrections with the	the
	Move the cursor with [2 1] and make corrections with the
	numbered buttons.	Changing
	To delete settings and use default settings	Changing
	To delete settings and use default settings
	Select “DNS Auto Setting” in step 6 and press [ENTER].

	To check the IP Address, etc.
	After performing steps 1–4 (➜ left)
	5 Press [3 4] to select “IP Address” and press [ENTER].

IP Address

[MAC Address]	00-00-00-00-00-00		Reference
[IP Address]	---.---.---.---
[Subnet Mask]	---.---.---.---
[Gateway]	---.---.---.---
[Primary DNS Address]	---.---.---.---
[Secondary DNS Address]	---.---.---.---
		RQT8926
To return to the previous screen		RQT8926
To return to the previous screen
Press [RETURN].
To exit the screen
To exit the screen			95
Press [RETURN] several times.			95