You can use only the scheduled timer recording that you want to use by switching only the desired scheduled timer recording to “On” from the list of scheduled timer recording settings.
After completing step 4 on the left column,
5 Press [3 4 2 1] to select the scheduled timer
recording that you want to use and press [ENTER].
|
|
| REC Timer setting |
|
| |
| REC1 |
| On | REC5 | ||
| REC2 |
| Off | REC6 | ||
| REC3 |
| Off | REC7 | ||
| REC4 |
| On |
|
|
|
|
|
|
|
|
|
|
|
| Day | : SUN |
|
| |
|
| Time | : AM 12:00 - AM 12:25 |
| ||
|
| Source | : FM 100.9 MHz |
|
| |
| View Details |
|
|
|
| |
| RETURN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selected scheduled timer recording day of the week and starting time.
6 Select the operation you want to set.
1Press [3 4] to select “Timer Setup” and press [ENTER].
REC Timer 1 Status Setting
Please select.
On
Off
- (Erase setting)
ENTER
Cancel
2Press [3 4] to select “On” and press [ENTER]. When you do not want to use the scheduled settings, select “Off”.
On : Use this scheduled timer recording
Off : Do not use this scheduled timer recording
(setting only)
Invalid (Overlap): This scheduled timer recording conflicts or overlaps with another scheduled timer recording and cannot be used.
s(Erase setting): Scheduled timer recording not yet set.
7 Press [RETURN].
The unit returns to the screen shown in step 5. Repeat steps 5 to 7 and switch each scheduled timer recording to “On” (or “Off”).
8 Press [RETURN] several times.
The unit returns to the previous screen.
9 Press [Í] to turn off the power.
If the power is not turned off, the timer will not operate.
To change settings of a scheduled timer recording
Select the number of the scheduled timer recording in step 5 and set again.
[Note]
≥Only radio and externally connected devices can be recorded with the scheduled timer recording function. You cannot record from a CD or “OPTION” either with this function.
≥To avoid cutting off the beginning of the track that is recording, the recording will begin a few seconds before the set day of the week and time. (While recording, “FREC” and the number of the scheduled timer recording will flash on the television.)
≥All scheduled timer recordings will operate on the specified day of the week and time, except for scheduled timer recordings indicated as “Off”.
≥If the starting time for the scheduled timer recording occurs at the same time as another scheduled timer recording finishes, the second recording may start late.
[Tips]
When a scheduled timer recording overlaps with another scheduled timer recording
You cannot record when a scheduled timer recording overlaps with another scheduled timer recording. When a timer is activated by selecting “On”, other timers that overlap with this scheduled recording will then be set to “Invalid (Overlap)” and cannot be used. If you want to activate a scheduled timer recording that is currently set to “Invalid (Overlap)”, follow the steps in the left column to switch the scheduled timer recording to “On”.
To delete unnecessary scheduled timer recording settings
After step 4 on the previous page
1Press [3 4 2 1] to select unnecessary scheduled timer recording settings and press [ENTER].
2Press [3 4] to select “Timer Setup” and press [ENTER].
3Press [3 4] to select “s (Erase setting)” and press [ENTER].
To play after setting a timer
Even after setting a scheduled timer recording you can play the unit as usual. However, after you finish playing, be sure to set the unit to standby mode. Scheduled timer recording will not record if the unit is turned on.
≥Changing the volume and audio source will have no effect on the details of the settings.
If a power failure, etc. caused timers to lose their setting
The clock is reset, and you cannot enter the timer recording screen.
Set the clock again (➜ page 15).
Advanced Operations Convenient functions
To return to the previous screen
Press [RETURN].
RQT8926
85