Unit displays (in general)
H∑∑ or F7∑∑ | ≥Trouble may have occurred. The number following “H” and “F7” depends on the | — |
(∑∑ stands for a number.) | status of the unit. Turn the unit off and then back to ON. Alternatively, turn the unit |
|
| off, disconnect the AC power supply cord, and then reconnect it. |
|
| ≥If the service numbers fail to clear, note the service number and contact a qualified | — |
| service person. |
|
|
|
|
NO DISC | ≥You haven’t inserted a disc: Insert one. | — |
| ≥You haven’t inserted the disc correctly: Insert it correctly. | 29 |
|
|
|
NO PLAY | ≥You inserted a disc the unit cannot play: Insert one it can. | 24 |
| ≥You inserted a blank disc. | — |
| ≥You inserted a disc that has not been finalized. | 24 |
|
|
|
U11 | ≥The disc may be dirty. | 26 |
|
|
|
U59 | ≥The temperature inside the unit has risen, and operation has stopped for safety | — |
| purposes. Wait about 30 minutes until the message has disappeared before using |
|
| the unit again. Place the unit in an area with good airflow and make sure that the |
|
| ventilation openings are not blocked. |
|
|
|
|
≥The HDMI connection acts unusually.The actual number following | — | |
(∑ stands for a number.) | depend on the state of this unit. |
|
| – The connected equipment is not HDMI compatible. |
|
| – The HDMI cable is too long. |
|
| – The HDMI cable is damaged. |
|
|
|
|
H19, F61 or F76 | ≥Trouble may have occurred. Turn the unit off and on. When the message still | — |
| appears, disconnect the AC power supply cord and consult your dealer. |
|
|
|
|
Unit displays (XM Satellite Radio advisory messages)
“ANTENNA” is flashing. | ≥The XM antenna is not properly connected. | 19 |
| Check the connection and make sure the antenna cable is not damaged. |
|
|
|
|
“LOADING” is flashing. | ≥The XM antenna is receiving and decoding the broadcast information. | — |
| Wait a few seconds for loading to complete. |
|
|
|
|
“NO SIGNL” is flashing. | ≥The XM signal is too weak. | 64 |
| Reorient the XM antenna for better reception. |
|
|
|
|
“OFF AIR” is flashing. | ≥The selected XM channel is not currently broadcasting. | 65, |
| Select a different channel. | 66 |
|
|
|
“UPDATING” is flashing. | ≥The XM antenna is being updated with the latest encryption code. | — |
| Wait a few seconds for the update to complete. |
|
| ≥You may have selected an XM channel that has been blocked, or is no longer | — |
| available with your subscription package. |
|
| For inquiry, call XM’s Listener Care at |
|
|
| |
|
|
|
XM – – – | ≥The selected XM channel is not available. | 65, |
| Select a different channel. | 66 |
|
|
|
– – – – | ≥Supplemental text information, such as the song title or artist’s name is not | 66 |
| available for that particular broadcast. |
|
| You can change the type of XM channel information that is displayed by pressing |
|
| [FL DISPLAY]. |
|
|
|
|
F70 | ≥An XM transmission error has occurred. | — |
| Turn the unit off and on. When the message still appears, disconnect the AC power |
|
| supply cord and consult your dealer. |
|
|
|
|
Reference
Reference
RQT8926
99