This function will restore the backup data that was saved on your PC to this unit.
If the HDD requires service, please wait until the HDD has been repaired before restoring the backup to the HDD.
Restoring the backup data to the HDD will reset the HDD (no tracks on the HDD). If restoring fails, the content of the HDD will be lost. When restoring the backup data, therefore, please exercise the utmost caution.
Perform “Preparation” and “Settings to check on the PC” as described on page 87.
1 Press [SETUP].
2 Press [3 4] to select “Other Setup” and press
[ENTER].
3 Press [3 4] to select “Maintenance” and press [1].
4 Press [3 4] to select “Backup/Restore” and press [ENTER].
5 Press [3 4] to select “Restore” and press [ENTER].
Restore
PC Name
User Name
Password
Restore Cancel
ENTER
Cancel
6 Press [3 4] to select “PC Name” and press [ENTER].
When the PC name is displayed
The PC name and other information that was used when previous backups and imports (➜ page 40) were performed may be displayed. In this case, check the PC name again, and if necessary, follow the steps below to make changes.
7 Enter the characters (➜ page 69).
Input the “User Name” and “Password” in steps 6 and 7 in the same manner.
8 Press [3 4 2 1] to select “Restore” and press
[ENTER].
Restore begins.
A message will be displayed, indicating that restore is complete. The unit will briefly stay this way, and then it will turn off automatically shortly after.
To return to the previous screen
Press [RETURN].
To cancel restore
1 Press and hold [Í] during restoring.
Restore
This function will pause and the power will turn off immediately.
Do you want to continue?
YesNo
ENTER
2Press [2 1] to select “Yes” and press [ENTER]. ≥This unit is turned off and the restore is canceled.
≥If restore is canceled before completion, all progress up to the point of cancelation will not be recorded and the HDD will be completely empty. Restore this unit again later.
[Note]
≥Restore may be canceled if your PC is turned off in an irregular manner or is forced to shut down due to errors. In this situation, restore again from the beginning. However, backups may not restore when the backup data contains abnormalities.
Advanced Operations Convenient functions
RQT8926
89