≥When you switch the television input to TV tuner mode, this unit will automatically switch to “TV Audio§”.
§If you want to output digital audio, connect the optical cable (➜ page 76) and select “DIGITAL IN” in “TV Audio Input”
menu (➜ page 94).
≥When you start playback on this unit, the television will automatically switch to the HDMI input mode for this unit.
≥Also from the Start menu, the input mode will be switched.
∫Speaker controlYou can select whether audio is output from this unit or the television speakers by using the television menu settings. For details, refer to the operating instructions of your television.
Home theater
Theater speakers are active.
≥When this unit is in standby mode, changing the television speakers to theater speakers in the television menu will automatically turn this unit on and select “TV Audio§” as the source.
§If you want to output digital audio, connect the optical cable
(➜ page 76) and select “DIGITAL IN” in “TV Audio Input” menu (➜ page 94).
≥The television speakers are automatically muted.
≥You can control the volume setting using the volume or mute button on the TV’s remote control. (The volume level is displayed on this unit’s FL display.)
≥To cancel muting, you can also use this unit’s remote control (➜ page 22).
≥If you turn off this unit, television speakers will be automatically activated.
TV
Television speakers are active.
≥The volume of this unit is set to “0”.
– This function works only when “DVD/CD” or “TV Audio” is selected as the source on this unit.
≥Audio output is
≥Audio from the CD is not output from the television speakers while recording to the HDD. However, if “Listening while Recording” is selected, audio will be output from this unit’s speakers. In this case, operate the volume settings with this unit’s remote control.
You can control the disc menus of this unit with the TV’s remote control when using the “Music Collection”, “DVD/CD”, “FM”, “AM” and “XM” source. When operating the TV’s remote control, refer to the illustration below for operation buttons.
1Select the operation menu by using the television menu settings. (For details, refer to the operating instructions of your television.)
ENTER/ PLAY
RETURN
2 Select the desired item on the Start menu (➜ page 30).
Start
Listen
Watch
Import/Record
Multiroom Listen
Setup
ENTER
Main Screen
If you select “Disc” in “Listen” or “Watch” on the Start menu
“EZ Sync” menu is displayed. Select the desired item.
EZ Sync
TOP MENU
MENU
Control Panel
≥“TOP MENU”: Shows a disc top menu (➜ page 50) or program list (➜ page 51).
≥“MENU”: Shows a disc menu (➜ page 52) or playlist (➜ page 51).
≥“Control Panel”: The basic operations for playback discs are available.
e.g., “DVD/CD”
PAUSE
PLAY
SKIP SKIP
Advanced Operations EZ Sync “HDAVI Control”
[Note]
Depending on the type of TV, the TV settings, or operations performed on the TV, Speaker Control may be automatically set to “Home theater”.
STOP
[Note]
RETURN
≥Depending on the menu, some button operations cannot be performed from the TV’s remote control.
≥“Control Panel” can be selected directly by using a button on the TV’s remote control (e.g. [SUB MENU]).
≥Depending on the situation, not only the EZ Sync menu, but this unit’s Start menu may be displayed as well. At this point, select “Disc” by pressing [3 4] (TV’s remote control) and selecting “Listen” or “Watch”. After that, you can operate the EZ Sync menu by operating the TV remote control.
≥You cannot input numbers with the numbered buttons on the remote control ([0] to [10]). Use this unit’s remote control to input the IP Address, etc.
RQT8926
77