40
LSQT1488
≥In the Quick start mode it may take some time
for automatic white balance to adjust, if the
scene being recorded has a light source
different from the scene last recorded. (When
the MagicPix function is used, however, the
white balance of the scene last recorded is
retained.)
≥In the Quick start mode, the zoom
magnification becomes 1k and the picture size
may differ from what it was before Quick start
standby mode.
≥If [ECONOMY] (l26) is set to [5MINUTES]
and the unit automatically goes into Quick start
standby mode, close the LCD monitor and then
open it again.
Reduces the image shaking (jitter) due to hand
movement when recording.
¬Rotate the mode dial to select or
.
Press the O.I.S. button.
O.I.S.: Optical Image Stabilizer
The image stabilizer icon [ ] appears.
To cancel the Optical Image Stabilizer
function
Press the O.I.S. button again.
≥The default setting is on.
≥Set the Intelligent Auto Mode to off before
turning the Optical Image Stabilizer function to
off.
≥When a tripod is used, we recommend that you
turn the image stabilizer off.
≥In the following cases, the image stabilizer
function may not work effectively.
jWhen the digital zoom is used
jWhen the unit is shaken greatly
jWhen you record a moving subject while
tracking it
Optical image stabilizer functionO.I.S.
SDR-S26P_PC-LSQT1488_mst.book 40 ページ 2009年2月6日 金曜日 午後4時0分