Using Auto Recording
Function
When the input signal is detected, the recording starts automatically.
1 | Connect the SD Video Camera with the | 4 |
| ||
| external device. (l 40) |
|
| ≥Always use the AC adaptor. This function does | 5 |
2 | not work with the battery alone. | |
Set up the external device such as timer |
| |
3 | setting. |
|
Confirm that the image or sound signal is | ||
4 | not output. |
|
Set the Record/Play mode Switch to [ | ] | |
5 | and set the operation mode to [MPEG4]. |
|
Press the [MENU] Button and then, select | ||
| [Auto recording setup] and press the Jog | |
6 | Ball. |
|
Set [REC Timer] to desired time. | 6 | |
| ≥The setting time is the period between starting | |
7 | recording and finishing recording. |
|
Select [Auto record standby] and press |
| |
| the Jog Ball. | 7 |
| ≥A verification message appears. | |
8Select [Yes] and press the Jog Ball.
≥Transits to the standby mode and the power is automatically shut down.
≥When the input signal is detected, the recording starts.
≥Pressing the Recording Start/Stop button during recording will stop the recording.
8
MODE
Ô
MENU 
×
4'%/'07
/2')OQFG 
5WRGTHKPG
#WVQTGEQTFKPIUGVWR
&KURNC[UGVWR
5GVWR
':+6
#7614'%14&+0)5'672
4'%6KOGT OKP
#WVQTGEQTFUVCPFD[
Ô
×
#7614'%14&+0)5'672
4'%6KOGT OKP
#WVQTGEQTFUVCPFD[
Ô
×
41
