![](/images/new-backgrounds/1230320/23032043x1.webp)
Reduces power consumption
• Power save: | When this function is turned On, luminous level of the plasma display is suppressed, so |
| power consumption is reduced. |
• Standby save: | When this function is turned On, power consumption of the microcomputer is reduced during |
| power supply standby (see page 10, 11, 12), so standby power of the set is reduced. |
•Power management: The unit power supply is turned On or Off depending on whether or not there is a signal during PC input mode.
This function is enabled when it is turned On. (Only during input from PC
Press to select “Power save” “Standby save”
“Power management”.
Press to select “On” or “Off”.
On Off
Setup |
|
RGB | |
| |
Input label | RGB1 |
Signal |
|
Screensaver |
|
Power save | Off |
Standby save | On |
Power management | Off |
OSD Language | English (UK) |
SET UP
Press to exit from Setup.
Note:
“Power management” and “Auto power off” are effective during normal viewing (one picture screen) only.
Customizing the Input labels
This function can change the label of the Input signal to be displayed.
Press to select Input label. | Setup |
|
| RGB | |
Press to change the Input label. |
| |
Input label | RGB1 | |
| Signal |
|
| Screensaver |
|
| Power save | Off |
| Standby save | On |
| Power management | Off |
| OSD Language | English (UK) |
Notes:
While selecting an Input signal through Optional Terminal Board connected to Slot1 to Slot3, the Input label will depend on each Optional Terminal Board.
Input labels for Slot1 to Slot3 and
[Slot1 Input] | INPUT1/VIDEO1/COMPONENT1/RGB1/RGB1(digital)/PC1/DVD1/CATV1/VCR1/STB1 |
[Slot2 Input] | INPUT2/VIDEO2/COMPONENT2/RGB2/RGB2(digital)/PC2/DVD2/CATV2/VCR2/STB2 |
[Slot3 Input] | INPUT3/VIDEO3/COMPONENT3/RGB3/PC3/DVD3/CATV3/VCR3/STB3 |
[PC (MiniD-sub) input] PC/COMPONENT/RGB/DVD/STB
22