Basic Controls

Remote Control Transmitter

R button (see page 21)

Press the R button to return to previous menu screen.

Standby (ON / OFF) button

The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 12).

Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode.

N button

(see page 25, 26, 27, 33)

POSITION buttons

ACTION button

Press to make selections.

POS. /SIZE button

(see page 23)

PICTURE button

(see page 26)

INPUT button

Press to select INPUT1, INPUT2, INPUT3 and PC input SLOTS sequentially. (see page 14) When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.

(Ex. INPUT1A, INPUT1B)

Sound mute On / Off

Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed.

Numeric buttons

(see page 44)

ASPECT button

Press to adjust the aspect. (see page 17)

SURROUND button

The surround setting switches on and off each time the

SURROUND button is pressed.

The benefits of surround sound are enormous. You can On Off be completely enveloped in sound; just as if you were

at a concert hall or cinema.

Status button

Press the “Status” button to display the current system status.

1Input label

2Aspect mode (see page 17) NANODRIFT Saver operating (see page 38)

3Off timer

The off timer indicator is displayed only when the off timer has been set.

4Clock display (see page 56)

 

PC

 

1

 

 

4:3

2

 

 

NANODRIFT

4

10:00

 

 

 

Off timer

90

3

SET UP button (see page 21) SOUND button (see page 32)

DIRECT INPUT buttons

Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the INPUT mode. (see page 14)

This button is used to switch directly to INPUT mode.

Volume Adjustment

Press the Volume Up “+” or Down “–” button to increase or decrease the sound volume level.

Channel Adjustment

This button cannot be used for this model.

OFF TIMER button

The Plasma Display can be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed.

30 60 90

0

When three minutes remain, “Off timer 3” will flash.

The off timer is cancelled if a power interruption occurs.

Remote ID lock (see page 44)

Digital Zoom (see page 20)

MULTI Window buttons (see page 18)

Surround On

16