Panasonic TH-85PF12E Signal menu, 3D Y/C Filter

Setup for Input Signals

Signal menu

Note:

“Signal” setup menu displays a different setting condition for each input signal.

1

2

3

4

Press to display the Setup menu. Press to select the “Signal”.

Press to display the Signal menu.

Press to select the menu to adjust.

Press to adjust the menu.

Press to exit from adjust mode.

				Setup	1/2
				Signal
				Screensaver
				Extended life settings
			Component/RGB-in select
								RGB
			Input label					PC
			Power save					Off
			Standby save					Off
			Power management					Off
			Auto power off					Off
			OSD Language			English (UK)
			Press ACTION (				) button
For Video (S VIDEO)			For RGB
	Signal	[ AV ]		Signal				[ RGB ]
	3D Y/C Filter (NTSC)	On	Sync				Auto
	Colour system	Auto		Cinema reality				Off
	Cinema reality	Off		XGA Mode				Auto
	Panasonic Auto (4:3)	4:3		Noise reduction				Off
	Noise reduction	Off		H-Freq.	63.98 kHz
				V-Freq. 60.02 Hz
				Signal Format	1280×1024/60

For Component				For Digital
	Signal		[ Component ]		Signal		[ Digital ]
Cinema reality		Off		Cinema reality		Off
	XGA Mode		Auto		Noise reduction		Off
	Noise reduction		Off		H-Freq.	63.98	kHz
	H-Freq.	63.98	kHz		V-Freq.	60.02	Hz
	V-Freq.	60.02	Hz		Dot Clock Freq.	108.0	MHz
	Signal Format	1280×1024/60			Signal Format	1280×1024/60

3D Y/C Filter – For NTSC AV images

Select “Signal” from the “Setup” menu during AV(S Video) input signal. (“Signal [AV]” menu is displayed.)

Press to select the “3D Y/C Filter (NTSC)” Press to set On / Off.

3D Y/C Filter (NTSC) On

Note:

When On, this setting only affects NTSC input signals.

49