Using Network Function
PJLink™ Protocol
The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol.
•Display setup
•Display status query
Supported commands
Commands to control the unit with PJLink™ protocol are shown in the table below.
Command | Control | Remark | |
POWR | Power control | Parameter | |
0 = Standby 1 = Power “On” | |||
|
| ||
POWR? | Power status query | Parameter | |
0 = Standby 1 = Power “On” | |||
|
| ||
INPT | Input switch | Parameter | |
INPT? | Input switch query | First byte: 1 (RGB) fixed | |
Second byte: Input position (from 1) | |||
|
| ||
AVMT | Shutter control | Parameter | |
|
| 10 = Picture On (picture mute deactivated), 11 = Picture Off (picture on mute) | |
|
| 20 = Audio On (audio mute deactivated), 21 = Audio Off (audio on mute) | |
|
| 30 = Shutter mode Off (picture and audio mute deactivated) | |
|
| 31 = Shutter mode On (picture and audio on mute) | |
AVMT? | Shutter control query | Parameter | |
|
| 11 = Picture Off (picture on mute) | |
|
| 21 = Audio Off (audio on mute) | |
|
| 30 = Shutter mode Off (picture and audio mute deactivated) | |
|
| 31 = Shutter mode On (picture and audio on mute) | |
ERST? | Error status query | Parameter | |
|
| First byte: Means fan error. 0 or 2. | |
|
| Second byte: 0 | |
|
| Third byte: 0 | |
|
| Fourth byte: 0 | |
|
| Fifth byte: 0 | |
|
| Sixth byte: Means other error. 0 or 2. | |
|
| Meaning of the 0 – 2 settings: | |
|
| 0 = Error is not detected, 2 = Error | |
LAMP? | Lamp status query | Not supported | |
INST? | Input switch list query | Parameter | |
|
| 11: Computer input | |
|
| 12 - 16: Slot 1 input (INPUT1A) | |
|
| Slot 1 input (INPUT1B) | |
|
| Slot 2 input (INPUT2A) | |
|
| Slot 2 input (INPUT2B) | |
|
| Slot 3 input (INPUT3) | |
|
| Numbers greater than 12 are depending on the slot installation condition | |
NAME? | Projector name query | Returns empty character (no name information) | |
INF1? | Manufacturer name query | Returns “Panasonic” | |
INF2? | Model name query | Returns | |
INFO? | Other information query | Returns version number | |
CLSS? | Class information query | Returns “1” |
PJLink™ security authentication
Set “Panasonic” for the PJLink™ password.
• PJLink™ is a pending trademark in Japan, the United States, and other countries or areas.
60