Panasonic TH-85PF12E Adjusting Pos. /Size

Adjusting Pos. /Size

1	Press to display the Pos. /Size menu.	During “Video (S Video)”, “Digital”,
		“SDI” and “HDMI” input signal.
2	Press to select the menu to adjust.		Pos. /Size
					Normal
			Normalise
			Auto Setup			0
				H-Pos
				H-Size		0
	Press to adjust the menu.			V-Pos		0
3				V-Size		0
				1:1 Pixel Mode			Off
		During “Component”, “RGB” and
		“PC” input signal.
			Pos. /Size
4
					Normal
	Press to exit from adjust mode.		Normalise
			Auto Setup
				H-Pos		0
				H-Size		0
				V-Pos		0
				V-Size		0
Notes:				Dot Clock		0
				Clock Phase		0
• Unadjustable items are grayed out.				1:1 Pixel Mode			Off
Adjustable items differ depending on the input signal and the display mode.

•Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)

•If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Picture Pos./Size function.

•If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, the adjustment is not memorized. When exiting the mode, the screen will return to a former adjustment.

Auto Setup H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the RGB or PC signal is received.

This setting is enabled under the following conditions:

•This setting only support single screen display. Two screen display or multiple display are not supported.

•When “Component/RGB-in Select” or “YUV/RGB-in select” in the “Setup” menu (see page 48) is set to “RGB”, this setting is enabled.

•When the signal is not PC format, this setting is enabled only if “Over scan” (see page 24) is “Off” or “1:1 Pixel Mode” (see page 25) is “On”, and H-Size/V-Size is not automatically adjusted.

This setting will be invalid and will not work under the following conditions:

•Aspect is set to “Just”

•“Display size” in the Options menu (see page 55) is set to “On”

Using Remote Control

Note:

To operate this function, please purchase remote controller sold separately.

Object model : N2QAYB000432

When on the remote control is pressed, “Auto Setup” will be executed.

When Auto Setup does not work, “Invalid” is displayed.

Auto mode

When the “Auto Setup“ is set to “Auto” in the Options menu (see page 56), automatic position adjustment starts:

•When the display power is turned ON.

•When the input signal is switched.

23