Digital Zoom
This displays an enlargement of the designated part of the displayed image.
1 Display the operation guide.
Press to access Digital Zoom.
The operation guide will be displayed.
During Digital Zoom, only the following buttons can be operated.
Exit
1
2
3
[Remote control] | [Unit] |
|
|
| |
POSITION / ACTION | Right side surface | |
|
| |
button | ENTER/ |
|
|
| |
VOL button | + / | VOL button |
VOL | ||
| ||
|
| |
MUTE button | MENU |
|
|
| |
SURROUND button | INPUT |
|
|
| |
OFF TIMER button |
|
|
Select the area of the image to be enlarged.
Press on the enlargement location to select.
The cursor will move.
Exit
2
Select the magnification required for the enlarged display.
Each time this is pressed, the magnification factor changes.
This is shown in the image being displayed.
σσ1 |
| σσ2 |
| σσ3 |
| σσ4 |
|
|
|
|
|
|
|
4 Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
•When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
•The Digital Zoom function cannot be selected while in the following operation state:
When MULTI DISPLAY Setup is On (see page 43). When Portrait Setup is On (see page 46).
When Screensaver (except for Negative image) is running (see page 35)
•While Digital Zoom is in operation, “Adjusting Pos. / Size” cannot be used.
20