![](/images/backgrounds/174632/174632-6625x1.png)
Adjusting Pos. /Size
1:1 Pixel Mode Adjusts the display size when 1125i, 1125p or 1250i signal is input.
Notes:
•Select On when you would like to replay 1920 × 1080 input signal.
•Applicable input signal;
1125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p, 1250 (1080) / 50i
•Select Off when flickering is shown around the image.
•
OffOn
1:1 Pixel Mode When the input signal is a 2k1k signal (2048 × 1080 / 24p, 2048 × 1080 / 24sF), the display size
(2k1k) | is adjusted as follows. | ||||
(For 2k1k signals) |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off | On (Left) | On (Center) | On (Right) |
Note:
2k1k signals can only be received when the Dual Link
Helpful Hint ( / Normalise Normalisation)
While the Pos. /Size display is active, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
25