Panasonic TH-85PF12E Reduces power consumption

Reduces power consumption

• Power save:	When this function is turned On, luminous level of the Plasma Display is suppressed, so
	power consumption is reduced.
• Standby save:	When this function is turned On, power consumption of the microcomputer is reduced
	during power supply standby (see page 12, 15, 16), so standby power of the set is reduced.
• Power management:	When this function is set to On, it operates under the following conditions to turn the power
	on or off automatically.
	When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal
	input:
	→Power is turned off (standby); the power indicator lights up orange.
	When pictures (HD/VD sync signals) are subsequently detected:
	→Power is turned on; the power indicator lights up green.
	Notes:
	• This function operates only during PC signal input.
	• This function is invalid during input from PC Input Terminal Board (TY-42TM6P).
	• This function is effective when “Sync” is set to “Auto”, “Component / RGB-in select” is set
	to “RGB” and during normal viewing (one picture screen).
• Auto power off:	Equipment power supply is turned Off when there is no signal.
	When this is set to On, the power supply of the unit goes Off 10 minutes after the input
	signals stop.
	Note:
	This function is effective during normal viewing (one picture screen) for input signals except
	PC IN terminal.

1	Press to select
	“Power save”
	“Standby save”
	“Power management”
	“Auto power off”.
2	Press to select “On” or “Off”.
	On	Off

3 Press to exit from Setup.

Setup	1/2
Signal
Screensaver
Extended life settings
Component/RGB-in select
		RGB
Input label		PC
Power save		Off
Standby save		Off
Power management		Off
Auto power off		Off
OSD Language	English (UK)

40