Setup for Input Signals
Sync
Select Signal from the “Setup” menu during RGB input signal.
Press to select the “Sync”.
Press to adjust.
|
|
|
|
|
| Signal | [ RGB ] |
| |
|
|
|
|
|
| Sync | Auto |
| |
|
|
|
|
|
| Cinema reality | Off |
|
|
|
|
|
|
|
| XGA Mode | Auto |
|
|
|
|
|
|
|
Setting RGB sync signal:
Confirm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
SyncAuto
Sync | on G |
SyncVBS
SDI Through
Set the active through function of the Dual Link
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link
Press to select the “SDI Through”. Press to select “On” or “Off”.
On: Enables active through.
Off: Disables active through.
| Signal | [ Digital ] | |
|
|
|
|
| Cinema reality | Off |
|
|
|
|
|
| SDI Through | Off | |
|
|
|
|
| Noise reduction | Off |
|
Input signal display
Displays the frequency and the type of the current input signal.
This display is valid only for Component / RGB / PC and Digital input signal. Display range:
Horizontal 15 - 110 kHz Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
63.98 |
| kHz |
| ||
|
| Hz |
| ||
60.02 |
| ||||
Signal Format |
| 1280×1024/60 |
| ||
|
|
|
|
| |
|
| kHz |
| ||
63.98 |
| ||||
|
| Hz |
| ||
60.02 |
| ||||
Dot Clock Freq. |
|
| MHz |
| |
108.0 |
| ||||
Signal Format |
|
|
| ||
| 1280×1024/60 |
| |||
52