Panasonic U500D Using the Function buttons, Enabling USB Sleep and Charge, Battery Settings

Operating Basics

Enabling USB Sleep and Charge

This utility can be used to enable and disable the USB Sleep and Charge function. Check the “USB Sleep and Charge” checkbox. In the default state, this function is disabled.Power supply mode settings

There are several USB Sleep and Charge function modes. “Mode 4 (Default)” should normally be used. Set one of the other modes (try from “Mode 3” to “Mode 1”)*1 if the charge function cannot be used in “Mode 4 (Default)”. This function may not be able to be used with some connected external devices even if the appropriate mode is selected. In this situation, uncheck the “USB Sleep and Charge” checkbox and stop using this function.

*1 Some mode may not be displayed in the list.

Battery Settings

This utility can be used to specify the lower limit of remaining battery life for USB Sleep and Charge. Move the slider bar to specify the lower limit. If the remaining battery life falls before the setting, the “USB Sleep and Charge” function will be stopped. Unchecking the “Enable under Battery Mode” checkbox sets the utility to only charge when the AC adaptor is connected.

Using the Function buttons

This section describes the Function buttons.

Seven buttons are provided with some models.

Icon	Function button	DVD	*CD/None
	ECO
	CD/DVD	Launch TOSHIBA	Launch Windows
		DVD PLAYER	Media Player
	Play/Pause	Play/Pause	Play/Pause
	Previous	Previous chapter	Previous track
	Next	Next chapter	Next track
	Mute	Mute	Mute
	Volume UP and	Volume UP/DOWN	Volume UP/Down
	DOWN

User’s Manual 4-11