Panasonic U500 Is not successful for a set time interval. Try, Lengthening this time interval

Troubleshooting

Problem	Procedure
Communication is	The computer will automatically cut off
cut off unexpectedly	communication when connection with the carrier
	is not successful for a set time interval. Try
	lengthening this time interval.
A CONNECT display	Check the error control setting in your
is quickly replaced	communications application.
by NO CARRIER	You can also use the AT\N command.
Character	In data transmission, make sure the parity bit
display becomes	and stop bit settings correspond with those of the
garbled during a	remote computer.
communication	Check the flow control and communication
	protocol.
You cannot receive	Check the rings before auto answer setting in
an incoming call	your communications application.
	You can also use the ATS0 command.
	If problems persist, contact your dealer.

LAN

ProblemProcedure

Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub.

If problems persist, consult your LAN administrator.

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter

4, Operating Basics.

Problem	Procedure
Cannot access	Make sure the computer’s wireless
Wireless LAN	communication switch is set to on.
	If problems persist, contact your LAN
	administrator.

The Wireless LAN feature is not available on all models.

9-18 User’s Manual