Getting To Know Your Machine

Connecting the Cables

ACTIVITY Lamp

Blinks when there is data traffic on the LAN.

LAN Connection Jack (10BASE-T/100BASE-TX)LAN Cable (10BASE-T/100BASE-TX Cable)

Insert the plug until a click is heard.

(LAN cable is not included with the product.) Purchase a Category 5 Cable, compliant with EIA/TIA 568-A-5 standard.

10BASE-T/100BASE-TX Ethernet HubEthernet LAN(10BASE-T/100BASE-TX Cable Not included)

Power Cord (Included)

Optional Telephone Handset Jack Connect the Telephone Line Cable from the Optional Handset Kit into the HANDSET jack on the back of the machine.

External Telephone Jack

You can connect an additional standard single line telephone to the machine. To connect a telephone,

remove the protective tab on the TEL jack.

RJ-11C

Telephone Jack

USB Port

See Operating Instructions

(For Document Management

System and Printer)

LINK Lamp

Illuminates when connected to the LAN.

Lamp will not turn ON if LAN cable is defective (contains breaks).

Optional Handset Kit (UE-403171)

Power Switch

After connecting all Cables and Power Cord, turn the Power Switch on the back of the machine

to the ON ( I ) position.

Telephone Line Jack

Plug one end of the Telephone Line Cable into the telephone jack supplied by the telephone company and the other end into the LINE jack on the back of the machine.

(Refer to the Dialing Method. See page 94.)

Optional 2nd Telephone Line Jack

(Optional G3 Communication Port Kit (UE-407026) is required.)

20