Your Machine

Getting To Know

ATTENTION

(Side View)

When the optional Paper Tray-2 is installed, and either Paper

CorrectIncorrectTray (Tray-1 or Tray-2) is not closed firmly, paper jam may

occur.

NOTE: When the optional Tray-2 is installed and the same size of paper is loaded in both trays, the paper will be supplied from Paper Tray-2 first. This is the default setting, if you wish to change the setting, please consult with your authorized Panasonic dealer.

To make copies from the Sheet Bypass

1.Set the original(s) on the ADF.

2.Press COPY .

3.Set a sheet of paper into the Sheet Bypass.

4.PRESS "✽" appears in the upper line of the LCD display.

5.If you wish to make multiple copies from the Sheet Bypass (Thick media), input the desired number of copies first and

press START . After each media sheet is processed, a "BYPASS ADD PAPER" prompt message will appear on

LCD display, insert an additional media into the Sheet Bypass (one-at-the-time) until your copy job is completed.

Adding Paper / Tray-2

Always remove all paper from Tray-2, fan and straighten remaining paper before replenishing paper. This helps prevent multiple sheets of paper from feeding through the Tray-2 at one time, thus reducing paper jams.

Maximum Copies Limitation

After setting the maximum allowed number of copies for each department (See page 117), consult with your Key Operator when the total copy count reaches the designated limit and the "DEPT. MAXIMUM COPIES HAS BEEN REACHED" message appears on the LCD.

33