![](/images/new-backgrounds/1318446/31844613x1.webp)
Setting up
Installing the Software 2
Installing Simple Viewer
•This installation is not required on the 2nd and later connections.
•Before inserting the
1.Insert the CD-ROM.
The setup menu will start.
2.Click [LUMIX Simple Viewer].
3.Proceed with installation according to messages appearing on the screen.
•Only when Windows 98SE is used, MDAC2.8 (Microsoft Data Access Components 2.8) may also be installed. Install it according to messages shown on the screen.
•Before first use following the completion of installation, be sure to select [Readme] from [Start] >> [All programs] >> [Panasonic] >> [LUMIX Simple Viewer] to read additional information.
•Simple Viewer is installed in the following folder. (It cannot be changed.)
C:\Program Files\Panasonic\
LUMIXSimpleViewer
If the setup menu does not start automatically:
•
If Simple Viewer cannot be installed:
•If Windows 2000/XP is used, you cannot install when you have logged on to the PC as a Limited Account user. Log on as an Administrator Account user and install again. For details, refer to the operating instructions for the PC.
7
VQT0R46