101
Settings
2. Input/output signal settings

2-6. Setting the ancillary data and

embedded audio data

A function for allowing the V ancillary data and embedded
audio data of the SDI input signals to pass through can be
set.
When an HD format is used:
The ancillary data starting with line 9 is allowed to pass
through.
When an SD format is used:
The ancillary data starting with line 12 is allowed to
pass through.
When 1080/59.94i, 720/59.94p, 1080/50i or 720/50p has
been selected as the unit’s system format setting, it is not
possible to allow the ancillary data and embedded audio
data to pass through even if SD format signals (480/59.94i
or 576/50i) have been input in the Dot by Dot mode or Up
Convert mode.
Refer to “2-1-2. Setting the input mode”.
Press the s button to light its indicator, and display the
System menu.
Use [F1] to display the Ancillary sub menu.
Setting for the program output signals
Use [F3] to select “On” or “Off” using the PGM item.
On The ancillary data and embedded audio data
of the SDI input materials selected by the
PGM bus are allowed to pass through.
Off The ancillary data and embedded audio data
are not allowed to pass through.
Setting for the preview output signals
Use [F4] to select “On” or “Off” using the PVW item.
On The ancillary data and embedded audio data
of the SDI input materials selected by the
PST bus are allowed to pass through.
Off The ancillary data and embedded audio data
are not allowed to pass through.
Setting for the output signals of the multi view display
Use [F5] to select “PGM”, “PVW” or “Off” using the MV
item.
PGM The ancillary data and embedded audio data
of the SDI input materials selected by the
PGM bus are allowed to pass through.
PVW The ancillary data and embedded audio data
of the SDI input materials selected by the
PST bus are allowed to pass through.
Off The ancillary data and embedded audio data
are not allowed to pass through.
Setting for the output signals of the AUX buses (AUX1
to AUX4)
Use [F2] to select “On” or “Off” using the AUX item.
On The ancillary data and embedded audio data
of the SDI input materials selected by the
AUX bus (AUX1 to AUX4) are allowed to pass
through.
Off The ancillary data and embedded audio data
are not allowed to pass through.