61
Basic
operations
1. Basic operations

1-11-1. Recording still images (Still)

Press the v button to light its indicator, and display the
Video Memory menu.
Use [F1] to display the Video Memory3 sub menu.
Use [F5] to select “Off using the Rec Lock item.
When the unit’s power has been turned back on
after it was turned off, the Rec Lock item setting is
restored to “On”.
Use [F1] to display the Video Memory1 sub menu.
Use [F2] to select “Still1” or “Still2” using the Select item.
Use [F1] to display the Rec1 sub menu.
Use [F2] to set the images to appear on the built-in
display using the Preview item.
On The image appearing on the built-in display is
forcibly switched to the image to be recorded
(AUX1 to AUX4 selected using the V Source
item) instead of the material selected by the
DISP bus.
Off The image source selected by the DISP bus
is displayed as a preview.
Use [F3] to set the image to be recorded in the video
memory using the V Source item.
AUX1 to
AUX4
The output signals of the AUX buses (AUX1
to AUX4) are recorded as the material.
Use [F5] to set the review display using the Review item.
On After the images have been recorded, the
images of the video memory recorded in the
AUX bus are displayed (for 2 seconds or so).
The next images can be recorded even
during review display.
Off The review display is not shown.
Use [F1] to display the Video Memory1 sub menu.
As soon as [F3] (Rec) is pressed, the still images are
recorded.
: This function can be actuated in any model whose
system version is V2.00.00 and up.
These operations cannot be performed in a model
with a system version of below V2.00.00.
If the [VMEM] button on the right of the number keys
is pressed and the video memory operation mode has
been established, the operation of this button is linked
with the [XPT/DSBL] button among the number keys.
When the recording of the still images is completed,
thumbnails of the still images are displayed in the
thumbnail screen.